DISPLAY
REC
COUNTER RESET
PLAY
STOP
ZERO RETURN
Zero return function | Video head cleaning |
The zero return function provides a convenient method of rap- idly returning to the starting point of recording or playback. The starting point can be indexed for any location on the tape by
pressing COUNTER RESET | and ZERO RETURN. |
1 Press DISPLAY. | |
Video head clogging
The video heads are the means by which the unit reads the picture from the tape during playback. In the unlikely event that the heads become dirty enough to be clogged, no picture will be played back. This can easily be deter- mined if, during playback of a known good tape, there is good sound, but no picture (picture is extremely snowy). If this is the case, have the unit checked by qualified service personnel.
Video head cleaning
Good Picture
Snowy Picture
Playback
| Before playback or recording, press COUNTER | ||||||||
2 RESET to set the counter to “00:00:00”. | |||||||||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |||
3 | Begin playback or recording. |
|
|
|
| ||||
PLAY |
| REC |
|
|
| ||||
|
|
| |||||||
4 Press STOP. |
|
|
|
|
| ||||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
Video head cleaning is needed when the playback picture becomes unclear. This signifies that the heads are getting dirty and can occur when playing poor quality or damaged tapes. If the heads require cleaning, use a equivalent high quality chemical
Notes:
•DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THE REAR COVER.
•Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.
•To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.
(VCR)
STOP | ||
5 Press ZERO RETURN. The tape will rewind and automatically stop at the “00:00:00” position.
37
5Q10501A | 37 | 4/17/04, 11:58 AM |