Toshiba 46WX800U, 55WX800U manual Using Channel Return, Using SurfLock, Regza-Link

Highlight the item you want to be tuned.

Select the first channel you want to view.

Chapter 6: Basic features

Elements of the Channel Browser™

1 2 3 4

History
88	Video	HDMI 1	11	3	8
	VCR	DVD

6

1Current list (History, ANT/CABLE, Inputs, or

REGZA-LINK)

2Input type

3Channel or input currently being viewed

4Channel or input that is currently highlighted in the browser

5Channels stored in the History List

6 Inputs or channels labels

To toggle among the available lists:

1 Open the Channel Browser™.

2 Press B or b.

Note:

•The History List opens by default. After selecting another list, the Channel Browser™ will open in the last selected list.

To tune to a channel or input in Browse mode:

1 Highlight an item. The TV tunes to the channel or input.

2 Press Oto close the Channel Browser™.

To tune to a channel or input in Select mode:

1

2 Press OK .

3 Press Oto close the Channel Browser™.

Adding and clearing channels and inputs in the History List

Adding channels to the History List:

As a channel or input is tuned, the Channel Browser™ adds it to the History List and displays it on the right side of the Channel Browser™.

Previously tuned channels and inputs shift to the left. Press C to surf back through the previously tuned channels and inputs.

The Channel Browser™ stores these channels: •Channels that are tuned using the numeric buttons on

the remote control.

•Channels that are tuned for at least 5 seconds using < or ,.

To clear channels from the History List: •Reconfigure the ANT/CABLE input.

•Turn off the TV.

Using Channel Return

You can switch between two channels without entering a channel number each time. This feature also works for external inputs.

1

2 Select a second channel using the Channel Number buttons (and the dash (=) button if needed).

3 Each time you press , the TV switches back and forth between the last two channels that were tuned.

Using SurfLock™

The SurfLock™ feature temporarily memorizes one

channel to the button, so you can return to it quickly, but one time only, from any other channel with

. This feature also works for external inputs.

To memorize a channel to the button:

1 Tune the channel you want to program into the button.

2 Press and hold for about 2 seconds until the message “Memorized” appears. The channel has

been programmed to the button.

3 You can then change channels repeatedly, and

when you press , the memorized channel will be tuned.

After pressing and then changing channels again, the memory is cleared and the button functions as Channel Return.

37