Toshiba 55WX800 Using the Hdmi settings feature, Setting the Hdmi audio mode, ModeDescription

Chapter 6: Basic features

Using the HDMI® settings feature

Note: If some HDMI legacy sources do not work properly with your HDMI TV, set the following options (Content Type and INSTAPORT™) to Off. Adjusting these settings should allow your HDMI legacy source to operate properly with your TV.

Mode (default setting) Description

Setting the HDMI® audio mode

1 Y> PREFERENCES > AV Connection > OK .

2 Press B or b to select HDMI 3 Audio or HDMI 4 Audio.

3 Press C or c to select Auto, Digital or Analog.

ModeDescription

	Adjusts the picture quality
	automatically by the content of
Enable Content	“Contents type” included in the
Type: On	HDMI input.
	Note: When Picture Mode is set to
	AutoView, this feature is available.
™	Reduces the lag time when

Auto

When viewing the HDMI 3 input or HDMI 4 input, if digital audio from the HDMI input is available, it will be output. If not, the TV detects and outputs analog audio from each Audio input.

When viewing the HDMI 3 input or

INSTAPORT	: On	switching HDMI sources.
		Adjusts RGB full range signal
		automatically.
		When Limited is selected, RGB
RGB Range: Auto output signal is output in the range
		from 16 to 235. When Full is
		selected, RGB output signal is
		output in the range from 0 to 255.

The HDMI settings (Content Type and RGB Range) need proper HDMI source devices. If your HDMI source device does not support these features, the TV may not work properly when these features are enabled.

Note: If your HDMI connection is capable of 1080p and/or your TV is capable of refresh rates greater than 60 Hz, you will need a High Speed HDMI® cable. Conventional HDMI/ DVI cables may not work properly with this mode.

1 Select the appropriate HDMI input mode (HDMI 1, HDMI 2, HDMI 3, or HDMI 4).

2 Y> PREFERENCES > AV Connection > OK .

3 Press B or b to select HDMI Settings. 4 Press B or b to select an item.

5 Press C or c to select a setting.

Digital HDMI 4 input, digital audio from the HDMI input will be output.

When viewing the HDMI 3 input or

Analog HDMI 4 input, analog audio from each input will be output.

Note:

•HDMI 3 Audio is set to Digital when Rear Shared Audio is set to ColorStream HD1 or Video 1 (- p. 31).

•HDMI 4 Audio is set to Digital when Side Shared Audio is set to PC or ColorStream HD2 (- p. 31).

Viewing the HDMI® signal information

1 Y> PREFERENCES > HDMI Information Display.

2 Press C or c to select On. Press . Normal banner and signal information banner appears.

Note:

•Signal information banner will appear when this feature is set to On and you watch HDMI input.

•If you press when this feature is set to Off, only normal banner will appear.

•When Content type is No Data, this is not displayed.

45