Adjusting the amplifier’s audio

Chapter 6: Basic features

Using the TV’s remote control, you can adjust or mute the sound volume of your amplifier. First, set the MODE SELECT switch on the remote control to TV.

•zZadjust the volume level.

• turns off the sound.

1 Y> PREFERENCES > REGZA-LINK Setup >

OK .

2 Press B or b to highlight Speaker Preference. 3 Press C or c to select Amplifier.

Note: Confirm that a connected REGZA-LINK®device (such as DVD player, etc.) is selected for the Amplifier input source.

Note:

•You can also use this function when the amplifier is connected to the TV’s DIGITAL AUDIO OUT terminal (not HDMI connection). Select a digital audio input mode on the amplifier.

•These functions depend on the device connected.

Other REGZA-LINK®functions

When Enable REGZA-LINKand all items in the

REGZA-LINK Setup menu are set to On, the following functions will be enabled.

Item	Description
TV Auto	If a REGZA-LINK®device is turned on,
Power	the TV turns on automatically.

If the TV is turned off, the TV will send a Auto Standby message to turn off all of the REGZA-

LINK devices connected to the TV.

To set the REGZA-LINK®Setup:

1 Y> PREFERENCES > REGZA-LINK Setup >

OK .

2 Press B or b to highlight Enable REGZA-LINK. 3 Press C or c to select On.

Note: If you set Enable REGZA-LINK to Off, the other items under REGZA-LINK Setup will be grayed out.

4 Press B or b to select a REGZA-LINKsetup item.

Press C or c to select On or the desired mode.

•TV Auto Power: On/Off

•Auto Standby: On/Off

•Amplifier Control: On/Off

•Speaker Preference: TV Speakers/Amplifier

Connecting a Toshiba PC compatible to REGZA-LINK®

This feature automatically sets suitable widescreen formats and picture preferences when the TV is connected to a Toshiba PC compatible with REGZA- LINK®.

Note: This feature depends on the equipment connected.

Amplifier

If Amplifier Control is set to On, you can

Control

adjust the sound volume or turn off the sound using the remote control.

From this item, you can set your audio output preference to the TV speakers or the amplifier. When this item is set to

Speaker

Amplifier, the remote control can be used to adjust or mute the volume of the

Preference

audio. This item will be not available and set to TV Speakers automatically unless

aREGZA-LINK®compatible audio receiver is connected.

Note: When you turn on the amplifier, change its input source, or adjust the sound volume, the sound will be output from the amplifier’s speakers even if TV Speakers has been selected. Turn the TV off and on again to output the sound from the TV speakers.