Toshiba 55HT1U Connectinga digital audio system, Connectinga personalcomputerPC, TVbackpanel IA2

Connectinga digital audio system

The TV's DiGiTAL AUDIOOUT terminal outputs a *Dolby _ Digital or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby _ Digital decoder or other external audio system with optical audio input.

You will need:

. Optical audio cable (Use an optical audio cable that has the larger "TosLink" connector and not the smaller "mini-optical" connector.)

DolbyDigitaldecoderor

TVbackpanel IA2_

To control the audio:

1Turn on the TV and the digital audio device.

Press MENUO on the TV s remote control and open the Sound menu.

3Highlight AudioSetup and press @.

4In the Optical Output Format field, select either Dolby Digital or PCN, depending on your device (_:_>"Selecting the optical audio output format" on page 39).

No te:

°Some audio systems may not be compatible with Dolby Digital bitstream signals. Older audio systems that are not compatible with standard optical out signals may not work properly, creating a high noise level that

may damage speakers or headphones.

THIS DAMAGE IS NOT COVERED BY YOUR WARRANTX

°The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions.

,_.Manufactured under license from Dolby Laboratories. Dolby, and the double-D symbol are trademarks of Dolby Laboratories.

Connectinga personalcomputer(PC}

With either the PC lN or HDMl connection, you cainwatch your computer's display on the TV and hear the sound from the TV's speakers.

To connect a PC to the PC IN terminal on the TV:

When connecting a PC to the PC IN terminalon the TV, use an analogRGB (15-pin) computercable and a PC audio cable.

TV back panel

cable

Conversion adapter (if necessary)

. To use a PC, set the monitor output resolution on the PC before connecting it to the TV. The PC [N terminal can accept and display VGA, SVGA, XGA, WXGA and SXGA signal formats. For detailed signal specifications (r,_' page 58).

Other formats or non-standard signals will not be displayed correctly.

. To display the optimum picture, use the PC setting feature (l_' "Using the PC settings feature" on page 44).

(continued)