Toshiba 55HT1U manual Usingthe PCsettings feature, Setting the PC Audio

5Press _ to select 0U. When the control panel is locked and any button oll the control panel (except POWER) is pressed, the message "NOT AVAILABLE" appears.

To unlock the control panel:

Select 0If in step 5 above, or press and hold the V0[.[JMF - button on the TV control panel for about 10 seconds until the volume icon appears.

Usingthe PCsettings feature

You can view an image from a PC on the TV screen.

When a PC is connected to the TV's PC tIN

terminal, you can use the PC Settings feature to

make adjustments to the image. [f the edges of the picture are cut off, readjust the Horizontal Position and Vertical Position. If the picture is affected by

interference, readjust the Clock Phase and Sampliug

Clock.

To adjust the PC settings:

1 Repeatedly press @ to select PC input mode

(_:_ "Selecting the video input source to view" page 29).

2Press MENUO and open the Setup menu,

3Highlight PC Settingsand press @.

Note: lf a PC is not connected or there is no

pc input signal this feature will be grayed

out in the Setup menu.

4' Press & or V to highlight the item you want to adjust.

5Press @ or _ to make the appropriate adjustments.

Note: The screen is disrupted momentarily when adjusting the PC settings. This is not a sign of malfunction.

Horizontal	Moves		the	picture		left/right.
Position	The	adjustment			range		is within		_+50 from
	centeL		'i_
Vertical	Moves		the	picture		up/down.
Position	The	adjustment			range		is within		_+10 fi'om
	center.		'i_
	Helps to reduce noise and sharpen the
Clock	picture.
Phase	The	adjustment			range		is within		_+16 fi'om
	center.		'i_
	Helps to reduce noise and minimize
Sampling	periodic		vertical			stripes		oil the	screen.
Clock	The	adjustment			range		is within		_+10 from
	center.*
Auto	Highlight			this	item		then	press	@
Adjust	to get		all optimum			adjustment

automatically.

*The default settings may vary depending on the input signal format.

Setting the PC Audio

This function allows you to output or mute the sound

from your PC when connecting using the PC IN

terminal and all analog RGB cable. (_>" page 18)

To set the PC Audio:

MENU

1 Press O and open the Sound menu.

Highlight AUdiO Setup and press @.

Press A or V to select PC Audio and then press or _ to select N0 or Yes.

Yes: When viewing the PC input, the audio from the PC Audio input call be heard.

N0: When viewing the PC input, there will be no audio.

Note: Because the PC and HDMI-1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the

HDMI 1 Audio menu setting. If PC Audio (comi_,_,d)

44