Toshiba 55HT1U Labelingchannels, To create and assign a custom label, To assign channel labels

Toadd a channel to the channel memory:

Highlight the checked box next to the channel number you want to add, and then press @ to remove the tick.

To manually add digital subchannels on a

physical channel:

Use the Channel Numbers and the Dash ([]) oll

the remote control to enter the channel number (for

example, 56-1 ).

[f the channel is found, the number will be added to the list and the box will be mlchecked.

[f the channel is not found, a message will appear.

Note: Skipped channels cannot be selected with r_ or_; however, they can still be accessed using the number keys on the remote control.

Labelingchannels

A list of common channel labels (iogos) for various

channels (ABC, CBS, etc.) will be programmed into the TV. You will be able to view and assign these logos from the Channel Labeling window. [f the

desired channel label is not provided in the list, you

will be able to manually enter/edit labels using the software keyboard.

To assign channel labels:

Press MENUO and open the Preferences menu.

2 Highlight ChannelLabelingand press @. The ChannelLabelingwindow opens.

3Press [_ or L_J to select the channel you want to label.

4. Press AV41_ to highlight the desired channel label and press @.

5Repeat steps 3 and 4 for other channels.

6To save your settings, highlight [}one and press @.

The maximum number of labels that can be stored

is 128.

To	remove		channel	labels:
1	Open	the	Channel Labelingwindow.
	Press	{-_	or L_J to select		the channel	for	which
	you	want	to remove	the	label.
	Press	AY'_	to highlight		NO Label	and	press @.

4.Repeat steps 2 and 3 for other channels.

[i To save your settings, highlight Done and press @.

[f the desired channel label is not available from the list of presets, you can create a custom label.

To create and assign a custom label:

1Open the ChannelLabelingwindow.

Press [_ or 1_ to select a channel you want to label.

3 Press ,IkV_ to highlight Cnst0nl and press @. The software keyboaM will appear.

4. Repeatedly press the corresponding key on the

remote control to highlight the desired character

on the on-screen software keyboard.

5 The highlighted character is entered after you either press a different key, press _ key, or after a

two-second pause.

Repeat steps 4 and 5 mltil you have entered all desired text.

7 When finished, press @.

New labels will be added to the list in alphabetical order and marked with an icon _ to indicate that

they are custom. Highlight the new custom label and press @ to assign.

Assigned channel labels will be displayed in the

banner, ChannelOptions,and ChannelBrowserTM.

(contin twd)

2fi