Toshiba 55HT1U manual Setting the HDN! audio mode, To delete the custom label

To delete the custom label:

1 Open the Channel Labeling window.

2Highlight the label to be deleted and press [].

3Highlight Yes from the deletion confirmation window and press @.

4Highlight [}one and press @ to save changes, and go back to the ChanneJ Labelingwindow.

Setting the HDN!® audio mode

To set the HDMI audio mode:

MENU

1 Press O and open the Soundmenu.

2Highlight Audio Setup and press @.

3Press & or V to select H[}NJ 1 Audio and then press 4 or _ to select the HDM[ 1 audio

mode (Auto, Digital or AnaJ0g). (Auto is the

recommended mode.) See "Connecting an HDM[ or DV[ device to the HDM[ input" (_c_ page 16).

When viewing the HDM[ l input, if digital audio from the HDMI input is

Autoavailable, it will be output. [f not, the

TV will automatically detect and output analog audio from the PC Audio input.

	When		viewing	the	HDM[	1 input,
Digital	digital		audio	from	the HDM[ input will
	be	output.
	When		viewing	the	HDM[	1 input,
Analog	analog		audio	from	the PC	Audio input
	will	be	outpuL

4 To save your settings, highlight Done and press

Note: Because the PC and HDMI- 1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDM! 1 Audio menu setting. If PC Audio is set to "No," the HDM! 1 Audio setting changes to "Auto."

If PC Audio is set to "Yes," the HDMI 1 Audio setting is set to "Digital" and is grayed out in the menu. (Also see item 2 on page 12 and "Setting the PC Audio" on page 44.)

27