Toshiba 55HT1U Settings features, UsingNPEGnoisereduction, Usingthe GameNode feature, On or Off

UsingNPEGnoisereduction

The MPEG noise reduction feature allows you

to reduce visible interference caused by MPEG

comwession. Choices for MPEG noise reduction are Off, Low,Riddle, and High.Offis automatically

selected when this feature is disabled ("grayed out").

To select the MPEG noise reduction level:

Press MENU© and open the Picturemenu.

2Highlight NoiseReductionand press @.

3Press at or V to highlight the NPEG Noise Reductionfield, and then press 4 or _ to select either 0ff, Low, Middle or High.

4' To save the new settings, highlight [}0ue and

press @.

To revert to the factory defaults, highlight Reset

and press @.

Usingthe GameNode feature

You can use the Game Mode feature for shorter

frame delays when playing a video game requiring

split-second timing between the on-screen display

and input from the controller (such as music creation

and high-action games).

This feature is more effective for 480i and 1080i input signals.

Note: To use the Game Mode feature, the current

video input must be Video, ColorStream ND, NDM! 1, NDMI 2 or NDMI 3. The Game Mode cannot be turned on when any other video input is selected.

To turn on Game Mode:

Press MENU© and open the Picture menu, highlight

the Game Node.

Press 4 or _ to select 0u.

To turn off Game Mode:

Select Ofl in step 2 above, change the video input, or turn the TV off and then on again.

Note: You can change the video input by pressing @_ on the remote control (_ page 29).

Usingthe advanced audio

settings features

Usingthe QSound® soundfeature

0Souud ® is the original name for a positional three-

dimensional (3D) sound processing algorithm from

QSound Labs that creates 3D audio effects from

multiple monophonic sources and sums the outputs

to two channels for presentation over regular stereo speakers.

To adjust the QSound ® settings:

1Put the TV in STEREO mode (_>""Selecting

stereo/SAP broadcasts" on page 39).

MENU

Press O and open the Sound menu.

3Highlight AdvancedAudio Settings and press @.

Press Y or at to highlight the QSound feature, and then press 4 or _ to turn the QSound effect

On or Off

•o . _,, == = ,

5To save the new settings, highlight [}oue and

press @.

To revert to the factory defaults, highlight Reset and press @.

Note: If the broadcast is monaural, the QSound effect will not work.

54