Getting started
2)Repeat step 1) to enter the rest of the characters. If you would like a blank space in the label name, you must choose a blank space from the list of characters.
Press Qto store your settings.
Sorting positions - analogue -
ATV channels may be moved and stored to the position of your choice.
1 From the SETUP menu, press V or U to select ATV Manual Tuning.
2 With the list of channels now showing, press V or U to select the channel you want to move and press Z.
ATV Manual Tuning |
|
| ||
Pos. | Station | |||
1 |
|
| ABCD |
|
2EFGH
3IJKL
4MNOP
5
6
7
8
3 Use V or U to move through the list to your preferred position. As you do so, the other channels will move to make room.
4 Press Y to store your move. Repeat as necessary, then press P.
DTV Manual Tuning - digital only -
This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known.
1 Press M, then press Y or Z to display the SETUP menu. 2 Press Vor U to select DTV Manual Tuning, then press
Q.
SETUP
Menu LanguageEnglish
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV Connection
Picture Position
Quick Setup
3 Enter the multiplex number using the number buttons or use Y or Z to adjust the number up or down and then press Q. The TV will start to search for that multiplex.
DTV Manual Tuning
UHF |
|
| 34 |
Signal Strength WEAK | STRONG | Quality | GOOD |
16 New channels - Total | 26 |
| |
New Pos. Name |
|
| Type |
831 |
|
|
|
832
833
834
835
When the multiplex is found, any channels that are not currently in the channel list will be added and the channel information will be updated.
4 Repeat as necessary. Press Pto finish.
Channels
The DTV channel order may be changed to suit your personal preference.
1 From the SETUP menu, press V or U to select DTV Settings and press Q.
2 Press V or U to select Channels, then press Q.
DTV Settings
Channels
Channel Options |
|
TV/Radio Mode | All Channels |
PIN Setting
Parental Control
Local Time Setting
3 With the list of channels showing, press V or U to select the channel you want to move, then press Q.
Channels
Pos. Name | Type |
6
9
11
31
34
36
48
52
4 Use V or U to move through the list to your preferred position. As you do so, the other channels will move to make room.
5 Press Qto store your move. Repeat as necessary, then press P.
The Skip setting for the highlighted channel can be
switched between “Set/Not Set” by pressing the RED button on the remote control. This feature allows you to set channels that will be skipped when Pu or PUare used to tune. However, these channels will still be available by direct number entry (when tuned a 8 icon will be displayed in the banner to indicate as a skipped channel).
Channels
Pos. Name | Type |
805
806
807
808
809
810
811
812
15