Connecting your TV
Connecting an amplifier equipped with an MPEG decoder
Amplifier equipped with
MPEG decoder
To Optical type digital audio input
Optical digital cable
(not supplied)
TV back view
TO Digital Audio output terminal
Front speaker |
| Surround speaker | Sub woofer |
Centre speaker | Signal flow |
|
You can enjoy motion picture with dynamic realistic sound by connecting the TV to an amplifier equipped with an MPEG audio decoder or MPEG audio processor. When using this setup, select Auto in the Digital Output menu.
Connecting an amplifier equipped with a digital audio (optical) input
Amplifier equipped with
digital audio input
To Optical type digital audio input
Optical digital cable
(not supplied)
TV back view
TO Digital Audio output terminal
Front speaker | Signal flow |
You can enjoy dynamic sound of
Side connections
You can connect a wide variety of auxiliary equipment via the terminals located on the right side of the panel o (2).
Please always refer to the owner’s manual of the equipment to be connected for full details.
Connection example
TV right side view
Camcorder | Video Games | Camcorder with |
|
|
•To select the side inputs, press o to display the video input mode list, press V or U to select o2 (- page 24), and then press Q.
•Before connecting any external equipment, turn off all main power switches.
•If you connect to both the
•If you connect mono sound equipment to o(2), connect the audio output of the equipment to the L/MONO jack on the TV.
•You can enjoy Video Games with this TV. However shooting games, where the player shoots at a target on the TV screen with a light gun, may not work because of the LCD Colour TV properties.
33