Using the TV’s features (General)
Activating Auto Contrast
When Auto Contrast is activated, it will automatically optimize the backlighting levels to suit ambient light conditions.
1 From the PICTURE menu, press V or U to select Auto Contrast.
2 Press Y or Z to select On or Off.
Setting x.v.Colour Selection
The colour range of x.v.Colour
1 From the PICTURE menu, press V or U to select x.v.Colour Selection.
2 Press Y or Z to select Auto, On or Off.
Note:
If a
Adjusting 3D Colour Management
You can adjust picture colour quality by selecting from 6 base colour adjustments : Red, Green, Blue, Yellow, Magenta and Cyan.
1 Press M, then press Y or Z to display the PICTURE menu.
2 Press V or U to select 3D Colour Management, then press Y or Z to select On.
3D Colour Management | On |
3 Press V or U to select Base Colour Adjustment.
4 Press Q, then press V or U to select the item you want to adjust.
| Base Colour Adjustment |
|
|
|
|
| ||
|
|
| Hue |
| Saturation | Brightness | ||
|
| Red | 0 |
| 0 | 0 |
|
|
|
| Green | 0 |
| 0 | 0 |
|
|
|
| Blue | 0 |
| 0 | 0 |
|
|
|
| Yellow | 0 |
| 0 | 0 |
|
|
|
| Magenta | 0 |
| 0 | 0 |
|
|
|
| Cyan | 0 |
| 0 | 0 |
|
|
|
|
|
| Reset |
|
|
|
5 Press Z, then press Y or Z to select Hue, Saturation or Brightness.
| Hue | Saturation | Brightness |
Red | 0 | 0 | 0 |
6 Press V or U to adjust the settings as required.
Notes:
•If you set 3D Colour Management to Off, this feature will not be available.
•In PC input mode (- page 24), this feature is not available.
Resetting the Base Colour Adjustment
The reset function returns the base colour adjustment to the factory settings.
1 From the Base Colour Adjustment menu, press V or
Uto select Reset.
2 Press Q.
Note:
In PC input mode (- page 24), this function is not available.
Activating MPEG NR (Noise Reduction)
If the incoming MPEG signal exhibits noise (is grainy), depending on the compression and conversion, the noise may be reduced when using this function.
1 From the PICTURE menu, press V or U to select
MPEG NR.
2 Press Y or Z to select Off, Low, Middle or High.
MPEG NR | Low |
Note:
In PC input mode (- page 24), this feature is not available.
Activating DNR (Digital Noise Reduction)
- analogue only -
If the incoming signal is weak and the picture is blurry, the picture may be improved when using this function.
1 From the PICTURE menu, press V or U to select DNR. 2 Press Y or Z to select Auto, Off, Low, Middle or High.
DNR | High |
Note:
In PC input mode (- page 24), this function is not available.
Using Auto Format
When the TV receives a true HDMI signal picture and Auto Format is On, the picture will automatically be displayed in HDMI signal format, irrespective of the TV’s previous setting. When in Digital TV, the display format will follow the broadcasted format.
1 Press M, then press Y or Z to display the FUNCTION menu.
FUNCTION
Teletext | Auto |
Panel Lock | Off |
Auto Format | On |
4:3 Stretch | Off |
Blue Screen | On |
Side Panel | 1 |
2 Press V or U to select Auto Format, then press Y or Z to select On or Off.
20