Toshiba 40RV52U, 46RV525U, 40RV525U owner manual To use your TV remote control to operate a, Aux

Chapter 3: Using the remote control

Using the remote control to control your other devices

If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must first program the remote control to recognize the device (if you have not already done so) ( pages 25–27).

To use your TV remote control to operate a:

•Cable converter box or satellite receiver, set the MODE SELECT switch to CABLE/SAT.

•VCR, set the MODE SELECT switch to AUX 1.

•DVD player or HTIB, set the MODE SELECT switch to

AUX 2.

Note: Even after the TV remote control is programmed, it may not operate certain features on any other devices. If this happens and you wish to use those features, you will need to use the device’s original remote control.

Point the remote control directly at the device.

16 17 18

19

1POWER Turns the selected device on and off.

2Channel Numbers (0-9)Press to directly access

channels (as opposed to ).

3+10 Press to directly access DVD chapters higher than 10.

4TOP MENU Accesses a DVD’s top menu.

5CH ST For channels programmed into the channel

memory ( page 31):

Sselects the next higher channel. T selects the next lower channel.

6GUIDE Displays the channel guide in the CABLE/SAT mode.

SET UP Accesses a DVD’s setup menu in the AUX mode.

7INFO Displays TV status information on-screen.

8STWX Press to navigate DVD menus (may not work on some DVD players).

9ENTER Required by some satellite receivers and DVD players to activate certain functions.

10DVD CLEAR Press to reset the title and chapter number.

11PLAY Begins playback of a tape or DVD.

12PAUSE Press during play or record mode to pause the picture; press again to restart.

13STOP Stops the tape or DVD.

14SKIP Skips forward to locate later DVD chapters.

15FF Fast-forwards the tape or DVD. (Press during play mode to view the picture moving rapidly forward.)

16SKIP Skips back to beginning of current DVD chapter, or locates previous chapters.

17REW Rewinds/reverses the tape or DVD. (Press during play mode to view the picture moving rapidly backward.)

18TV/VCR To view one program while recording another, press to select TV mode.

SEARCH selects a specific DVD chapter, title or time.

19REC Starts tape recording.

20MODE SELECT switch Set to “TV” to control the TV; “CABLE/SAT” to control a cable converter box or satellite receiver; “AUX 1” to control a VCR; “AUX 2” to control a DVD player or HTIB.

23