Chapter 6: Using the TV’s features
Adjusting the audio
Muting the sound
Press 
on the remote control to partially reduce (1/2 MUTE) or turn off (MUTE) the sound. Each time you press 
, the mute mode will change in the following order:
1/2 Mute 
Mute 
Volume 
If the closed caption mode is set to Off when you select “MUTE” mode, the closed caption feature is automatically activated if the TV program is Closed Captioned. To mute the audio without automatically activating the closed caption feature, use 
to set the volume to 0. See “Using the closed caption mode” ( page 43) for more information on closed caption modes.
Using the digital audio selector
You can use the Digital Audio Selector to conveniently switch between audio tracks on a digital channel (for those channels that have multiple audio tracks). This temporarily overrides the audio track chosen by the language option under Audio Setup ( “Selecting stereo/SAP broadcasts” on page 44).
To use the digital audio selector:
1 Press 
and open the Audio menu.
2 Highlight Digital Audio Selector and press 
.
Audio
Digital Audio Selector
Audio Settings
Advanced Audio Settings
Audio Setup
3 Press S or T to select Audio, and then press W or X to select the desired service.
4 Press 
.
Selecting stereo/SAP broadcasts
The
When the TV receives a stereo or SAP broadcast, the word
“STEREO” or “SAP” appears 
is pressed. The MTS feature is only available for analog signals on the ANT/CABLE input.
To listen to stereo sound:
1 Press 
and open the Audio menu.
2 Highlight Audio Setup and press 
.
3 In the MTS field, select Stereo.
4 To save the new settings, highlight Done and press 
. To reset the settings to the factory defaults, highlight Reset and press 
.
Note:
•You can typically leave the TV in Stereo mode because it will automatically output the type of sound being broadcast (stereo or monaural).
•If the stereo sound is noisy, select Mono to reduce the noise.
To listen to an alternate language on an ATSC digital station (if available):
Highlight the Language field in step 3 above, and then press
Wor X to select the language you prefer.
To listen to a second audio program on an analog station (if available):
Select SAP in step 3 above.
Note:
•A second audio program (SAP) can be heard only on those TV stations that offer it. For example, a station might broadcast another language as a second audio program. If you have SAP on, you will see the current program on the screen but hear the other language instead of the program’s normal audio.
•If you have SAP on and the station you are watching is not broadcasting a second audio program, the station’s normal audio will be output. However, occasionally there is no sound at all in SAP mode. If this happens, set the MTS feature to Stereo mode.
44