Connecting your TV
•A coaxial cable is the standard cable that comes in from your antenna or cable converter box. Coaxial cables use “F” connectors.
•Standard A/V (audio/video) cables are usually color coded accord- ing to use: yellow for video and red and white for audio. The red audio cable is for the stereo right channel, and the white audio cable is for the stereo left (or mono) channel. If you look at the rear panel of the TV, you will see that the terminals are color coded in the same manner as the cables.
•
•Component video cables provide better picture performance than
•Digital audio coaxial cable is for use with digital audio equipment that has digital audio output (see page 13.)
ANTENNA | |
Coaxial Cable | Cable |
AUDIO
Cables
Component video
Cables
VIDEO
CableDIGITAL AUDID
Coaxial Cable
NOTICE: RISK OF EQUIPMENT DAMAGE!
Do not plug in any power cords until you have finished connecting all equipment.
Safeguards | Important |
ToshibaWelcome to
yourConnecting TV
Remote ControlUsing the
Connecting a VCR
This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel.
TV
You will need:
•two coaxial cables
•one set of standard A/V cables
Note:
If using a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. For better picture quality, if your VCR has
your TVSetting up
Using
Cable
IN
IN from ANT | OUT to TV |
OUT
Stereo VCR
The unauthorized recording, use, distri- bution or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.
Featuresthe TV’s
CH 3 | L | R | |
CH 4 | |||
VIDEO | AUDIO | ||
|
7
Appendix
7 | 14/03/2006, 3:30 PM |