Toshiba 15VL64, 20VL64 manual Setting up the picture, ENGLISH-17

20VL64-en.book Page 17 Thursday, February 1, 2007 5:06 PM

Setting up the picture

Selecting the picture mode					TINT: When an NTSC video signal is connected
					to EXT1, EXT2, EXT3 or EXT3-S, you can adjust
You can select your desired picture type from four					the colour tint setting. If you do not connect this
picture modes: 1, 2, 3, or M.					type of video, then the TINT option will not be
To select the picture mode:					available on the OSD menu.
					There are more advanced settings open for
•	Using the remote control
					adjustment: Black Stretch, Noise Reduction,
Press		on the remote control repeatedly until
a preferred mode is selected.					Colour Temperature. To adjust the advanced
					settings:
Picture					4.	In the Picture menu, press /		until
Mode		MENU	P	EXIT		Picture Advanced Setting is highlighted.
					5.	Press	or OK to display the Picture
• Using the on-screen display menu
						Advanced Setting page.
1.	Press MENU, and then press			/ until the	6.	Press	/ until the item you want to
	Picture menu appears.					adjust is highlighted and press		/ to
2.	Press	to highlight Picture Mode and press				adjust the level.

/ to select a preferred mode.

Picture

Picture

Picture Mode

1

Contrast

53

Picture Mode

1

53

Brightness

32

Contrast

Colour

Picture Advanced Setting

32

Off

Brightness

32

Sharpness

Black Stretch

Colour

+0

32

Noise Reduction

Off

Sharpness

Tint

+0

+0

Colour Temperature

Cool

Tint

+0

Picture Advanced Setting

Picture Reset

Picture Advanced Setting >

MENU OK EXIT

MENU OK EXIT

Adjusting the picture quality

MENU/ENTER EXIT

7. To continue adjusting the other items, repeat

If you are not satisfied with the preset picture

step 6.

quality, you can additionally adjust the picture

contrast, brightness, colour, and sharpness levels

Item

Options

based on a selected picture mode.

Black Stretch (increases the

Low, Middle,

To adjust the settings:

strength of dark areas of the

High, Off

1.

In the Picture menu, press

/

until the

picture)

item you want to adjust is highlighted.

Noise Reduction (adjusts the

Low, Middle,

2.

Press /

to adjust the level.

noise reduction strength)

High, Off

3.

To continue adjusting the other items, repeat

Colour Temperature (selects a

Normal,

step 1-2.

preferred color temp.)

Warm, Cool

Selection

Pressing

Note:

Contrast

lower

higher

Brightness

darker

lighter

When the selected input signal is PC, the

following functions will not be available: Colour,

Colour

paler

deeper

Sharpness, Tint, Black Stretch, and Noise

Sharpness

softer

sharper

Reduction.

Tint

reddish

greenish

To reset the picture settings:

In the Picture > Picture Advanced Setting menu,

The changes you make in the picture settings will

press to highlight Picture Reset and press or

be stored to the M mode.

OK to return all of the picture settings to the

default values of 1 mode.

ENGLISH-17-