Toshiba 15VL64, 20VL64 Editing programs, Setting up the sound, Selecting a sound mode, ENGLISH-15

20VL64-en.book Page 15 Thursday, February 1, 2007 5:06 PM

Editing programs, Setting up the sound

Editing programs							11. Press		to highlight Skip and press /
								to select On. The selected channel will be
To set the TV to your personal needs, you can
								skipped when you press P		/P .
name the programs, swap channel numbers
							If you want to restore the skipped channel, repeat
(change channels sequence), skip the programs
							step 10-11and select Off in step 11.
that you don’t need by using the functions
provided in the Programme Edit menu.							Setting up the sound
To assign an up to 5-character label to channels:
							You can adjust the sound volume of your TV by
1.	Press MENU, and then press				/	until	using @/6on your remote control or TV. You
	the Channel menu appears.
2.	Highlight Programme Edit and press					or	can control the other sound settings by entering
	OK to display the Programme Edit page.						the Audio menu.
							Selecting a sound mode
		Programme Edit					There are five sound modes available. To select a
		Position		01
							preset sound mode, press			on the remote
		Name	------
		Position Swap	--				control repeatedly until the preferred mode is
		Skip		Off
							selected.
			MENU OK EXIT
								Mode	Sound Quality
3.	Highlight Position and press				/ or the
								Flat	flat sound (factory setting)
	numeric button to select the channel you
								Hall	a concert hall filled with a rich warm
	want to edit.								sound (factory setting)
4.	Press	to highlight Name and press				or		Theatre	a movie theatre filled with a
	OK. An asterisk will display in the first								dynamic sound (factory setting)
	place.							News	news/dialogue (factory setting)
5.	Press	/ to select a desired character						Memory	your personal preference

from among A-Z, 0-9, and symbols like . + - , etc. for each. You can move between

6.	characters by pressing / .		to the far	Adjusting the sound quality
	When complete, press OK or			You can change the quality of your TV’s sound by
	left hand side until the * disappears.
				adjusting the balance, treble, and bass.
To swap channels:
				To adjust the sound balance:
You can sort out the similar types of channels
				1. Press	to highlight Balance and press /
from others or re-arrange the channel sequence
				to change the setting.
to a preferred order by swapping channels.
7.	Highlight Position and press /		or the
	numeric button to select the channel you				Audio
	want to swap.				Sound Mode	Flat
					Balance		0
8.	Press	to highlight Position Swap and
					Sound Type	L+R
	enter another channel number that you				AVL	Off
	would like to swap.				Speaker Out	On
					Audio Advanced Setting >
9.	Press OK. The channel number will change				Audio Reset
	immediately.				MENU OK EXIT

To skip unwanted channels:

10.Highlight Position and press / or the numeric button to select the channel you want to skip.

ENGLISH-15-