Programming
When you press P 
/P 
, your TV will stop only on the channels you program into the TV's channel memory. Follow the steps below to program all active channels into the TV's memory.
Programming channels automatically
Note: All previously stored programmes will be lost when Auto Programme is started.
Your TV can automatically detect all active channels in your area and store them in the channel memory.
To program channels automatically:
1.Press MENU, and then press 
/ 
until the Channel menu appears.
2.Press 
to highlight Auto Programme and
press 
or OK to display the Auto Programme page.
Channel |
|
Auto Programme > |
|
Manual Programme > |
|
Programme Edit > |
|
Blue Screen | On |
MENU OK EXIT
3.For the rest steps, please refer to steps 3 and 4, "Tuning the TV using Quick Setup
for the first time
, 
, EXIT, or MENU.
4.Check the stored channels by pressing P 
/P 
.
Adding channels manually
After you have automatically programmed the active channels into the TV's channel memory, you can manually add some channels or erase some channels that you don’t want to view.
To add channels:
1.In the Channel menu, press 
/ 
to
highlight Manual Programme. Press 
or OK to display the Manual Programme page.
2.Highlight Sound System and press 
/ 
to select a TV standard according to your local TV system.
3. Press 
to highlight Position and press 
/
or the numeric buttons to select a channel you want to set up.
Manual Programme |
|
|
|
Sound System |
| BG | |
Position |
| 01 |
|
Frequency |
| ___.__ Mhz | |
Manual Fine Tuning |
|
|
|
- |
| + | |
AFT |
| Off | |
Store |
| 01 |
|
MENU OK EXIT
4.Press 
to highlight Frequency and
press 
/ 
to start the tuning system in descending or ascending order. If a channel is found, the picture is displayed.
5.If the picture is not clear or the signal is poor, you can fine tune the frequency. Press 
to highlight Manual Fine Tuning
and press 
/ 
to adjust the setting until the picture quality is acceptable.
Note: Under normal circumstances, you don’t need to use the Manual Fine Tuning or AFT function.
The Auto Fine Tuning function (AFT) if set to On will automatically search and lock a suitable frequency for the channel.
6.To save the current channel settings to the TV’s memory, highlight Store and press OK. The channel number will stop flashing.