Q Why are there problems with text?
Good performance of text depends on a good strong broadcast signal. This normally requires a roof or loft aerial. If the text is unreadable or garbled, check the aerial. Go to the main index page of the text service and look for the User’s Guide. This will explain the basic operation of text in some detail. If further information is needed on how to use text, see the "Using Teletext" on page 21 for details.
Q Why are there no text
There are none broadcast or they have not yet
loaded. Press 
to access. See "To select a
Q Why are the four coloured text numbers visible but no text?
Text has been selected whilst viewing an external source i.e. DVD or VCR. No text will appear on screen or a box may appear stating no information is available. Select a broadcasting
channel and press 
to access.
Q Why are the colours wrong when a NTSC source is played?
1.Connect the source via a SCART lead and play.
2.Set Colour System in the Special menu as Auto, NTSC3.58, or NTSC4.43.
3.Go to the Picture menu and adjust Tint. See "Adjusting the picture quality" on page 17 for details.
Q Theimprove?picture from my VCR is poor, how can I
You can turn the VCR mode on in the OSD menu to minimize or solve this problem.
1.Go to the Picture menu and press 
to highlight Picture Advanced Setting.
2.Press 
or OK to display the Picture Advanced Setting page and press 
to highlight VCR Mode.
3.Press 
/ 
to select On.
| Picture |
| |||||
Picture Mode | 1 |
|
| ||||
Contrast |
|
|
|
| 53 |
|
|
|
|
| |||||
Brightness |
|
|
| 32 |
|
| |
|
| ||||||
Colour |
|
|
| 32 |
|
| |
|
| ||||||
Sharpness |
|
|
|
| Picture Advanced Setting |
| |
|
| +0 |
| Off | |||
|
|
|
|
| Black Stretch | ||
Tint |
|
| +0 |
|
| ||
|
|
|
|
| Noise Reduction | Off | |
Picture Advanced Setting > Colour Temperature |
| Cool | |||||
| MENU OKVCREXITMode |
| On | ||||
|
|
|
|
| Picture Reset |
| |
MENU OK EXIT
Note: The VCR Mode is available in TV position 0 and EXT modes selected only.