Digital Connections

MAKING CONNECTIONS

playback then the 5.1 analog outputs will need to be connected to the 5.1 analog bypass inputs of the companion surround sound preamplifier, processor or AV receiver. Please make sure you have the correct channels plugged into the Front Left, Front Right, Center, Left and Right Surrounds and the Sub Woofer connections on the DVD 8 and the companion surround sound component.

Note: Be sure to match the colors of the plugs on the cable with the corresponding

jacks on the DVD player and the stereo component: red for Right audio and white for Left audio. Do not make connections to the PHONO input jacks on the stereo component, as it is not compatible with regular line level inputs.

Make digital connections from the DVD player to an AV component that features digital input capability or one or more multi-channel audio decoders to realize the full cinematic experience made possible by the DVD format. This DVD player features one set each of an optical and a coaxial digital audio output jack and can output Dolby Digital, DTS and PCM bit streams. Make connections from the DIGITAL OUTPUT OPTICAL (Toslink) jacks to the digital optical input jack on the AV component using an optical fiber cable (sold separately). Make connections from the DIGITAL OUTPUT COAXIAL jacks to the digital coaxial input jack on the AV component using a coaxial cable (sold separately). It is not necessary to make more than one type of digital connection to a single component, when you are making connections to an amp or receiver that has internal Dolby Digital or DTS decoding capabilities.