Rear Panel

CONTROLS AND DISPLAYS

1.POWER INPUT (AC IN)

•Connect to an AC power supply using the included power supply cord. Aftermarket AC power cables may also be used. Consult your dealer for advice.

2.HDMI OUTPUT JACK

•Use HDMI to connect to a compatible TV, Video Monitor, surround preamplifier or AV receiver that has an HDMI input. This can be set to 480i, 480p, 576p, 720p or 1080i in resolution in the Set Up menu. Please be aware that trying to operate your video display at a setting higher than it is meant to operate may damage it. Please read your TV or video display owner’s manual carefully for the possible settings it will accept.

3.STEREO OUTPUTS

•Mixed or stereo Left and Right Audio Output jacks that are configured in the on screen display (OSD) SET UP menu. These are in addition to the 5.1 analog outputs.

4.5.1 ANALOG OUTPUTS

•Front Left, Front Right, Surround Left and Right, Center and Sub Woofer outputs for the multi channel playback of movies, DVD Audio or SACD disks.

5.S-VIDEO OUTPUT

•Use this analog video output for a video display that has an S-Video connector as its’ best video input connection. This output is 480i or 576i in resolution. (NTSC/PAL)

6.COMPOSITE VIDEO OUTPUT

•This analog video output is for use with older design video displays. Both the S-Video and the component video outputs offer a better quality video signal to a compatible video display. This output is 480i or 576i in resolution. (NTSC/PAL)

7.COMPONENT VIDEO (Y, Pb, Pr) JACKS

•The component video connections offer the best quality analog video output from the DVD 8. The connections have a Red, Green or Blue (RGB) colored insert inside them to make proper connections easier to do. This can be set to 480i, 480p, 576p, 720p or 1080i in resolution. Be aware that trying to operate your video display at a setting higher than it is meant to operate may damage it. Please read your TV or video display owner’s manual carefully for the possible settings it will accept.