Connecting up | 02 |
Connecting to an AV amplifier or receiver
To enjoy multichannel surround sound you need to connect this recorder to an AV amp/receiver using the digital optical output. In addition to the digital connection, we recommend also connecting using the stereo analog connection.
You’ll probably also want to connect a video output to your AV amp/receiver. Use the standard (composite) video output (as shown here), or the
See also Audio Out settings on page 79 for how to set up the digital audio output. (Noise may be output from your speakers if the recorder is not set up to work with your AV amp/receiver.)
Important
•Do not connect this recorder to your TV ‘through’ your VCR or other component using A/V cables. Always connect it directly to your TV.
VHF/UHF | VIDEO |
IN | IN |
| TV |
1 | 2 |
|
|
| OUTPUT 1 |
|
| INPUT 1/ |
| R | L | R | L | |
| AUTO START | ||||
OUT | IN |
|
|
| REC |
| VHF/UHF |
|
|
|
|
Y | PB | PR | AUDIO | VIDEO | AUDIO | VIDEO | IN | OPTICAL | ||
COMPONENT VIDEO OUT |
| OUTPUT 2 |
|
| INPUT 3 |
| CONTROL | DIGITAL OUT | ||
4
A/V | VIDEO |
IN 1 | OUT |
AC IN |
|
DIGITAL IN | AV amp/ |
OPTICAL | receiver |
1
Antenna/cable TV wall outlet
1 Connect RF antenna cables as shown.
This enables you to watch and record TV channels.
2Connect the AUDIO and VIDEO OUTPUT jacks (1 or 2) on this recorder to a set of audio/video inputs on your AV amp/receiver.
3Use an optical digital audio cable (not supplied) to connect the OPTICAL DIGITAL OUT jack on this recorder to an optical digital input on your AV amp/ receiver.
This enables you to listen to multichannel surround sound.
4Connect the AV amp/receiver’s video output to a video input on your TV.
3
Note
•The diagram shows standard video connections, but you can alternatively use the
•If your AV amp/receiver doesn’t have an optical digital input, but has a coaxial type, converter boxes that convert from optical to coaxial are available at specialist audio dealers.
17
En