Pioneer DVR-320-S Playing CDs and WMA/MP3 discs, Playing Video CD/Super VCDs

Page 29

Getting started

04

Playing CDs and WMA/MP3 discs

The table below shows the basic playback controls for audio CDs, and WMA/MP3 files.

PLAY Press to start playback.

STOP Press to stop playback.

PAUSE Pauses playback, or restarts playback

when paused.

REV SCAN FWD SCAN CD and MP3 only: Press to start scanning. Press again to increase the scanning speed. (There are two scan speeds; the current scan speed is shown on-screen.)

PREV NEXT Press to skip to previous/next track (or folder for WMA/MP3 disc). (You can also use the front panel +/– buttons to do this during playback.)

During playback, enter a track number then press ENTER to skip directly to that track.

Press CLEAR to clear a number entry and

CLEAR

start again.

 

ENTER

 

Note

•If you want to play a DTS audio CD, make sure the recorder is connected to a DTS-compatible amp/ receiver with a digital connection. Noise will be output through the analog outputs. Also make sure that STEREO is selected using the AUDIO button (see Switching audio channels on page 41).

•Scanning doesn’t work with WMA tracks.

Playing Video CD/Super VCDs

The table below shows the basic playback controls for Video CD/Super VCDs.

Some discs feature Playback Control (PBC for short) menus. These discs show PBC in the display when you load them and display a menu on-screen from where you can select what to watch.

PLAY Press to start playback.

Video CD only: If RESUME is displayed on- screen, playback starts from the place last stopped.

STOP Press to stop playback.

Video CD only: You can resume playback from the same point by pressing PLAY. (Press STOP again to cancel the resume function.)

PAUSE Pauses playback, or restarts playback

when paused.

REV SCAN FWD SCAN Press to start scanning. Press repeatedly to increase the scanning speed.

 

 

 

Press to skip to previous/next track. (You

 

 

PREV

NEXT

 

 

 

 

can also use the front panel +/– buttons to

 

 

 

 

 

 

 

 

do this during playback.)

 

 

 

 

When a PBC menu is displayed, press to

 

 

 

 

display the previous/next page.

 

 

 

 

 

 

 

 

 

During playback, enter a track number

 

 

 

 

 

 

 

 

then press ENTER to skip directly to that

 

 

 

 

track.

 

 

 

 

Press CLEAR to clear a number entry and

 

 

 

CLEAR

start again.

 

 

 

 

 

 

 

 

While a PBC menu screen is displayed,

 

 

 

 

 

 

 

ENTER

use to select numbered menu items.

BACK CM SKIP Video CD only: Each press skips backward/ forward progressively up to a maximum of 10 minutes forward or three minutes back.

Note that this function doesn’t work when playing in PBC mode.

STEP/SLOW During playback, press to start slow- motion playback. Press repeatedly to change the playback speed.

While paused, press to advance a single frame (forward direction only).

RETURN Press to display the disc menu of a Video CD/Super VCD playing in PBC mode.

29

En

Page 28 Page 30
Image 29
Page 28 Page 30
Contents DVR-320-S LASERPRODUCTCLASS1 Operating Environment POWER-CORD CautionContents Resetting the recorder Language settings Recording settings Playback settingsSetting up the remote to control your TV Additional informationBefore you start Chapter FeaturesBefore you start Before you start Before you start What’s in the box Putting the batteries in the remote controlUsing the remote control DVD-R/RW compatibility General disc compatibilityCD-R/RW compatibility Compressed audio compatibilityPC-created disc compatibility WMA Windows Media Audio compatibilityJpeg file compatibility Original Connecting up Chapter Connecting upRear panel connections Front panel connectionsVCR Connecting up Easy connectionsConnecting using the component video output Connecting up Using other types of video outputConnecting using an S-video output Connect RF antenna cables as shown This enables you to watch and record TV channelsThis enables you to watch the output from this recorder This enables you to watch discs This enables you to listen to multichannel surround sound Connecting up Connecting to an AV amplifier or receiverConnecting a VCR or analog camcorder Connecting up Connecting other AV sourcesPlugging After checking all the connections, plug in the recorderFront panel Controls and displaysControls and displays Chapter Play Controls and displays DisplayREM FineReturn Controls and displays Remote controlREV Scan / FWD Scan PauseStop REC Controls and displaysPrev / Next Getting started Chapter Switching on and setting upGetting started Enter Getting startedOther settings you can make Getting started Making your first recording Using the built-in TV tunerPlaying back your recording Changing TV channelsChanging audio channels Basic playbackNicam Nicam a Nicam BPlaying DVD discs Press STANDBY/ON to switch onPress OPEN/CLOSE to open the disc tray Load a disc To stop playback, press StopPlaying Video CD/Super VCDs Playing CDs and WMA/MP3 discsStop display Using the Home MenuDisplaying disc information on- screen Recording display Play displayGetting started Playback Using the Disc Navigator to browse the contents of a discPlayback Chapter IntroductionPlayback Using the Disc Navigator with recordable discsChanging the thumbnail picture for a title Select ‘Play’ from the menu optionsScanning discs Navigating discsScan 1 Scan 2 Scan 3 Scan Scan Scan 2 ScanPlaying in slow motion Frame advance/frame reverseSlow 1/2 PressPlay Mode Playback Play Mode menuSearch Mode Repeat play RepeatOther Program play functions Program playRepeat to build up a program list Start Program Play Starts playback of a saved program listClear Displaying and switching subtitlesSwitching DVD soundtracks Switching camera angles Playback Switching audio channelsTo display/switch the audio channel, press Audio repeatedly To switch the camera angle, press AngleRecording Chapter RecordingAbout DVD recording Recording time and picture qualityRecording equipment and copyright Setting the picture quality/recording timeRecording Restrictions on video recording Recording Basic recording from the TV Setting a timer recordingLoad a recordable disc Use the Audio button to select the audio channel to recordPress Easy Timer Easy Timer RecordingRecording Set the TV channel and recording qualityPress Timer REC to display the Timer Recording screen Standard timer recordingCurrent time Recording start time Press Enter to set the start timeTo exit the timer recording screen, press Home Menu Timer recording using the G-Code programming systemEnter the timer recording settings COD E Code programming with the power offExtending a timer recording in progress Programming a new end time Canceling and stopping a timer recording in progressMoving the end time by 30-minute blocks Simultaneous recording and playback Recording Timer recording FAQYou can’t enter a timer program if the clock isn’t set Press REC when you’re ready to start recording Set up the recorderRecording Recording from an external component Automatic recording from a satellite tunerFinalizing a disc Playing your recordings on other DVD playersHow to change the recorder’s setting Press Home Menu and select ‘Disc Setup’ Select ‘Finalize’Press Home Menu and select ‘Disc Setup’ Select ‘Initialize’ Initializing a DVD-RW discDisc Navigator screen EditingEditing Chapter Disc Navigator menu options Playlist / Original indicatorEditing Play Editing Editing VR mode Original and Video mode contentErase Title Name Ttl NameChapter Edit Chpt Edit Using the remote key shortcuts to input a nameI 4 î ï ì í ¡ L 5 £Erase Section Erase Sec Inserting chapter markers into a titleSelect ‘Erase Sec’ from the Disc Navigator menu options Use TitleLock / Unlock You can’t undo a Lock commandErase All UndoPress Enter after selecting each character Creating and editing a VR mode Play ListYou can give titles new names of up to 64 characters long Input a name on Original title to put into the Play List CreateMove DivideCombine Press Enter to add the titleSelect ‘Undo’ from the Disc Navigator Play List menu options This command erases all the titles from the Play ListDisc History Chapter Using the Disc HistoryDisc History PhotoViewer Chapter PhotoViewerPlaying a slideshow Reloading files from a discRotating the screen PhotoViewerZooming the screen Disc Setup menu Chapter Disc Setup menuBasic settings Input Disc NameInitialize settings Disc Setup menuFinalize settings FinalizeVideo/Audio Adjust menu Chapter Video/Audio Adjust menuSetting the picture quality for TV and external inputs Choosing a presetSelect the picture quality setting you want to adjust Video/Audio Adjust menuSetting the picture quality for disc playback Audio DRC Initial Setup menu Chapter Initial Setup menuUsing the Initial Setup menu Clock SettingInput Line System Initial Setup menuOn Screen Display Front Panel DisplayPower Save Setup Navigator Tuner settingsRemote Control Set Auto Channel Setting Auto ScanChannel Swapping Manual CH SettingInput Colour System Video In / Out settingsCode CH Setting Ntsc on PAL TV Component Video OutPAL Secam PALAudio Out settings Initial Setup menu Audio In settings96kHz PCM Out Dolby Digital OutDTS Out Mpeg OutOSD Language Initial Setup menu Language settingsAudio Language Subtitle LanguageDVD Menu Language Recording settingsSubtitle Display Selecting ‘Other’ languagesPlayback settings Still Picture Parental Lock Set PasswordSeamless Playback Parental LockParental Lock Country Code Parental Lock Change PasswordParental Lock Change Level Press Enter to set the new Country code Angle IndicatorSetting up the remote to control your Resetting the recorderUsing the TV remote control buttons Additional informationAdditional information Screen sizes and disc formats General Additional information TroubleshootingAdditional information What kind of discs can I use for recording? Frequently asked questionsCountry code list Additional information Language code listLanguage Language code letter, Language code Country, Country code, Country code letterAudio will conform to the Bilingual Recording setting This content is copy protectedOperation stopped due to power failure Repairing discHandling discs Cleaning the pickup lensDamaged discs Storing discsAdditional information Condensation Hints on installationManual recording modes Moving the recorderAdditional information Glossary PBC PlayBack Control Video CD/Super VCD only PCM Pulse Code ModulationProgressive scan video PureCinemaTimer Additional information SpecificationsTuner Input/OutputSupplied accessories VRB1336-A Pioneer Corporation
Top Page Image Contents