Pioneer DVR-320-S Inserting chapter markers into a title, Erase Section Erase Sec, Title

07Editing

•Preview – Preview chapters: Select the chapter you want to play; press STOP to return to the chapter edit screen.

•Undo – Undo the last command (only works with VR mode disc edits).

3Press RETURN to get back to the menu options on the left side of the screen.

4To return to the Disc Navigator screen, press RETURN again, or select ‘Back’ from the menu options on the left.

Note

•When editing VR mode Original content, it may not be possible to erase chapters less than five seconds long.

•It may not always be possible to combine two chapters, even though they are adjacent. If a chapter has been divided into three, then the middle chapter erased, it is not possible to combine the two remaining chapters into one.

Inserting chapter markers into a title

VR mode

You can create new chapters within a title using the CHP MARK button while playing the title or during recording. This is useful not just for navigation of the disc content but also for editing purposes.

PAUSE

• For greater control over the exact position of chapter markers it can be useful to use the PAUSE button and/or the slow-motion and frame advance/reverse

controls ( ).

Note

•You cannot insert chapter markers during Auto Start Recording.

•If you pause a recording in VR mode, the recorder automatically starts a new chapter when you restart the recording.

•When recording in Video mode, the recorder automatically puts chapter markers in at regular intervals. It is not possible to add extra chapter markers manually after recording (see also Auto Chapter (Video) on page 83).

•The Play List and Original content on a disc can each contain up to 999 chapters.

Erase Section (Erase Sec)

VR mode

Using this command you can delete a part of an Original title, ideal for cutting out the commercial breaks in a recording made from the TV.

1Select ‘Erase Sec’ from the Disc Navigator menu options.

2 Use the	(cursor buttons) to select a
title.

After selecting a title, the Erase Sec screen appears from which you can mark the start and end points of the section to erase.

CHP

MARK

1Start playback of the title you want to create new chapter markers in.

You can use the Play command from the Disc Navigator menu to do this.

2Press CHP MARK at any point where you want a new chapter to begin.

A chapter marker icon appears on-screen briefly to confirm a new chapter mark has been inserted:

Erase Sec

Original

DVD

Title 1

Erase Sec

Back

15:00 Wed 13/12 Pr 5	LP
Recording Time	0h01m24s
1-1	0.00.52.17
Play Pause
A	B
From	To

58

En