Pioneer DVR-320-S Additional information Chapter, Resetting the recorder

Page 87

Additional information

13

Chapter 13

Additional information

Resetting the recorder

If you need to, you can reset the recorder to all its factory settings.

1 Make sure that the recorder is on.

2 Press and hold STOP and press STANDBY/ ON.

The recorder turns off with all settings reset.

Setting up the remote to control your

TV

You can use the supplied remote to control your TV. To be able to use this feature you first have to program the remote with a maker code from the table below.

1Press and hold down the CLEAR button, then enter the maker code for your TV.

The LED indicator on the remote controls lights.

See the table below for the list of maker codes. If there is more than one code given for your make, input the first one in the list.

•If the maker’s name of your TV doesn’t appear in the table below, you will not be able to use this remote to control your TV.

2 Press TV to check that the remote works with your TV.

If the remote is set up correctly, the TV should switch on/ off. If it doesn’t and there is another code given for your maker, repeat step 1 with a new code.

Using the TV remote control buttons

The table below shows how to use this remote control with your TV.

Button	What it does
TV	Press to switch the TV on/off (standby)

INPUT SELECT	Press to change the TV’s video input

TV VOLUME	Use to adjust the TV volume

TV CHANNEL	Use to change TV channels

Maker	Code
Alba	66

Bush	76

Finlux	84

Fisher	61, 65

Fujitsu	77

Funai	67

Goldstar	79

Grandiente	87

Grundig	51, 82

Hitachi	56, 60, 83, 86

ITT	70

Mitsubishi	59

Nokia	53, 81

Panasonic	58, 72

Philips	57, 85

Pioneer	50, 80

RCA	68

Salora	71

Samsung	73, 75

Sanyo	74

Sei	78

Sharp	52

Sony	54

Tandy	69

Telefunken	64

Thomson	62

Toshiba	55

Victor	63

87

En

Image 87

Contents DVR-320-S LASERPRODUCTCLASS1 Operating Environment POWER-CORD CautionContents Additional information Language settings Recording settings Playback settingsResetting the recorder Setting up the remote to control your TVFeatures Before you startBefore you start Chapter Before you start Putting the batteries in the remote control Using the remote controlBefore you start What’s in the box Compressed audio compatibility General disc compatibilityDVD-R/RW compatibility CD-R/RW compatibilityWMA Windows Media Audio compatibility Jpeg file compatibilityPC-created disc compatibility Original Front panel connections Connecting upConnecting up Chapter Rear panel connectionsVCR Connecting up Easy connectionsConnecting up Using other types of video output Connecting using an S-video outputConnecting using the component video output This enables you to watch and record TV channels This enables you to watch the output from this recorderConnect RF antenna cables as shown This enables you to watch discs This enables you to listen to multichannel surround sound Connecting up Connecting to an AV amplifier or receiverAfter checking all the connections, plug in the recorder Connecting up Connecting other AV sourcesConnecting a VCR or analog camcorder PluggingControls and displays Controls and displays ChapterFront panel Fine Controls and displays DisplayPlay REMPause Controls and displays Remote controlReturn REV Scan / FWD ScanControls and displays Prev / NextStop REC Switching on and setting up Getting startedGetting started Chapter Enter Getting startedOther settings you can make Changing TV channels Using the built-in TV tunerGetting started Making your first recording Playing back your recordingNicam a Nicam B Basic playbackChanging audio channels NicamTo stop playback, press Stop Press STANDBY/ON to switch onPlaying DVD discs Press OPEN/CLOSE to open the disc tray Load a discPlaying Video CD/Super VCDs Playing CDs and WMA/MP3 discsUsing the Home Menu Displaying disc information on- screenStop display Recording display Play displayGetting started Introduction Using the Disc Navigator to browse the contents of a discPlayback Playback ChapterSelect ‘Play’ from the menu options Using the Disc Navigator with recordable discsPlayback Changing the thumbnail picture for a titleScan Scan 2 Scan Navigating discsScanning discs Scan 1 Scan 2 Scan 3 ScanPress Frame advance/frame reversePlaying in slow motion Slow 1/2Playback Play Mode menu Search ModePlay Mode Repeat play RepeatStart Program Play Starts playback of a saved program list Program playOther Program play functions Repeat to build up a program listDisplaying and switching subtitles Switching DVD soundtracksClear To switch the camera angle, press Angle Playback Switching audio channelsSwitching camera angles To display/switch the audio channel, press Audio repeatedlyRecording time and picture quality RecordingRecording Chapter About DVD recordingSetting the picture quality/recording time Recording Restrictions on video recordingRecording equipment and copyright Use the Audio button to select the audio channel to record Setting a timer recordingRecording Basic recording from the TV Load a recordable discSet the TV channel and recording quality Easy Timer RecordingPress Easy Timer RecordingPress Enter to set the start time Standard timer recordingPress Timer REC to display the Timer Recording screen Current time Recording start timeTimer recording using the G-Code programming system Enter the timer recording settingsTo exit the timer recording screen, press Home Menu Code programming with the power off Extending a timer recording in progressCOD E Canceling and stopping a timer recording in progress Moving the end time by 30-minute blocksProgramming a new end time Recording Timer recording FAQ You can’t enter a timer program if the clock isn’t setSimultaneous recording and playback Automatic recording from a satellite tuner Set up the recorderPress REC when you’re ready to start recording Recording Recording from an external componentFinalizing a disc Playing your recordings on other DVD playersInitializing a DVD-RW disc Press Home Menu and select ‘Disc Setup’ Select ‘Finalize’How to change the recorder’s setting Press Home Menu and select ‘Disc Setup’ Select ‘Initialize’Editing Editing ChapterDisc Navigator screen Playlist / Original indicator EditingDisc Navigator menu options Title Name Ttl Name Editing Editing VR mode Original and Video mode contentPlay EraseL 5 £ Using the remote key shortcuts to input a nameChapter Edit Chpt Edit I 4 î ï ì í ¡Title Inserting chapter markers into a titleErase Section Erase Sec Select ‘Erase Sec’ from the Disc Navigator menu options UseUndo You can’t undo a Lock commandLock / Unlock Erase AllCreating and editing a VR mode Play List You can give titles new names of up to 64 characters longPress Enter after selecting each character Input a name on Original title to put into the Play List CreatePress Enter to add the title DivideMove CombineSelect ‘Undo’ from the Disc Navigator Play List menu options This command erases all the titles from the Play ListUsing the Disc History Disc HistoryDisc History Chapter Reloading files from a disc PhotoViewerPhotoViewer Chapter Playing a slideshowPhotoViewer Zooming the screenRotating the screen Input Disc Name Disc Setup menuDisc Setup menu Chapter Basic settingsFinalize Disc Setup menuInitialize settings Finalize settingsChoosing a preset Video/Audio Adjust menuVideo/Audio Adjust menu Chapter Setting the picture quality for TV and external inputsVideo/Audio Adjust menu Setting the picture quality for disc playbackSelect the picture quality setting you want to adjust Audio DRC Clock Setting Initial Setup menuInitial Setup menu Chapter Using the Initial Setup menuFront Panel Display Initial Setup menuInput Line System On Screen DisplayAuto Channel Setting Auto Scan Tuner settingsPower Save Setup Navigator Remote Control SetChannel Swapping Manual CH SettingVideo In / Out settings Code CH SettingInput Colour System PAL Component Video OutNtsc on PAL TV PAL SecamAudio Out settings Initial Setup menu Audio In settingsMpeg Out Dolby Digital Out96kHz PCM Out DTS OutSubtitle Language Initial Setup menu Language settingsOSD Language Audio LanguageSelecting ‘Other’ languages Recording settingsDVD Menu Language Subtitle DisplayPlayback settings Parental Lock Parental Lock Set PasswordStill Picture Seamless PlaybackParental Lock Change Password Parental Lock Change LevelParental Lock Country Code Press Enter to set the new Country code Angle IndicatorAdditional information Resetting the recorderSetting up the remote to control your Using the TV remote control buttonsAdditional information Screen sizes and disc formats General Additional information TroubleshootingAdditional information What kind of discs can I use for recording? Frequently asked questionsCountry, Country code, Country code letter Additional information Language code listCountry code list Language Language code letter, Language codeRepairing disc This content is copy protectedAudio will conform to the Bilingual Recording setting Operation stopped due to power failureStoring discs Cleaning the pickup lensHandling discs Damaged discsMoving the recorder Hints on installationAdditional information Condensation Manual recording modesAdditional information Glossary PureCinema PCM Pulse Code ModulationPBC PlayBack Control Video CD/Super VCD only Progressive scan videoInput/Output Additional information SpecificationsTimer TunerSupplied accessories VRB1336-A Pioneer Corporation