Pioneer DVR-320-S operating instructions Audio DRC, Remember

Page 72

11The Video/Audio Adjust menu

4 Use the (cursor left/right) buttons to adjust the currently selected picture quality setting.

5When you have all the settings as you want them, press HOME MENU to exit.

Tip

•To see more of the picture as you adjust different settings, press ENTER after selecting the setting you want to adjust.

Note

•The Black Setup setting applies only when playing NTSC discs.

Audio DRC

• Default setting: Off

When watching Dolby Digital material at low volume, it’s easy to lose low level sounds completely—including some of the dialog. Switching on Audio DRC (Dynamic Range Control) can help by bringing up the low level sounds, while controlling high level peaks.

1During playback or when paused, press HOME MENU and select ‘Video/Audio Adjust’.

2Select ‘Audio Adjust’.

3 Use the (cursor left/right) buttons to adjust DRC from ‘Off‘ to ‘Max’.

Audio Adjust

Audio DRC

Off

Max

Exactly how much difference you can hear between the settings will depend on the material.

Remember

•Audio DRC is not effective when listening to a disc via the digital output when Dolby Digital Out is set to Dolby Digital. In this case adjust the dynamic range from your AV amplifier/receiver.

72

En

Image 72

Contents DVR-320-S LASERPRODUCTCLASS1 POWER-CORD Caution Operating EnvironmentContents Language settings Recording settings Playback settings Resetting the recorderSetting up the remote to control your TV Additional informationFeatures Before you startBefore you start Chapter Before you start Putting the batteries in the remote control Using the remote controlBefore you start What’s in the box General disc compatibility DVD-R/RW compatibilityCD-R/RW compatibility Compressed audio compatibilityWMA Windows Media Audio compatibility Jpeg file compatibilityPC-created disc compatibility Original Connecting up Connecting up ChapterRear panel connections Front panel connectionsConnecting up Easy connections VCRConnecting up Using other types of video output Connecting using an S-video outputConnecting using the component video output This enables you to watch and record TV channels This enables you to watch the output from this recorderConnect RF antenna cables as shown This enables you to watch discs Connecting up Connecting to an AV amplifier or receiver This enables you to listen to multichannel surround soundConnecting up Connecting other AV sources Connecting a VCR or analog camcorderPlugging After checking all the connections, plug in the recorderControls and displays Controls and displays ChapterFront panel Controls and displays Display PlayREM FineControls and displays Remote control ReturnREV Scan / FWD Scan PauseControls and displays Prev / NextStop REC Switching on and setting up Getting startedGetting started Chapter Getting started EnterOther settings you can make Using the built-in TV tuner Getting started Making your first recordingPlaying back your recording Changing TV channelsBasic playback Changing audio channelsNicam Nicam a Nicam BPress STANDBY/ON to switch on Playing DVD discsPress OPEN/CLOSE to open the disc tray Load a disc To stop playback, press StopPlaying CDs and WMA/MP3 discs Playing Video CD/Super VCDsUsing the Home Menu Displaying disc information on- screenStop display Play display Recording displayGetting started Using the Disc Navigator to browse the contents of a disc PlaybackPlayback Chapter IntroductionUsing the Disc Navigator with recordable discs PlaybackChanging the thumbnail picture for a title Select ‘Play’ from the menu optionsNavigating discs Scanning discsScan 1 Scan 2 Scan 3 Scan Scan Scan 2 ScanFrame advance/frame reverse Playing in slow motionSlow 1/2 PressPlayback Play Mode menu Search ModePlay Mode Repeat Repeat playProgram play Other Program play functionsRepeat to build up a program list Start Program Play Starts playback of a saved program listDisplaying and switching subtitles Switching DVD soundtracksClear Playback Switching audio channels Switching camera anglesTo display/switch the audio channel, press Audio repeatedly To switch the camera angle, press AngleRecording Recording ChapterAbout DVD recording Recording time and picture qualitySetting the picture quality/recording time Recording Restrictions on video recordingRecording equipment and copyright Setting a timer recording Recording Basic recording from the TVLoad a recordable disc Use the Audio button to select the audio channel to recordEasy Timer Recording Press Easy TimerRecording Set the TV channel and recording qualityStandard timer recording Press Timer REC to display the Timer Recording screenCurrent time Recording start time Press Enter to set the start timeTimer recording using the G-Code programming system Enter the timer recording settingsTo exit the timer recording screen, press Home Menu Code programming with the power off Extending a timer recording in progressCOD E Canceling and stopping a timer recording in progress Moving the end time by 30-minute blocksProgramming a new end time Recording Timer recording FAQ You can’t enter a timer program if the clock isn’t setSimultaneous recording and playback Set up the recorder Press REC when you’re ready to start recordingRecording Recording from an external component Automatic recording from a satellite tunerPlaying your recordings on other DVD players Finalizing a discPress Home Menu and select ‘Disc Setup’ Select ‘Finalize’ How to change the recorder’s settingPress Home Menu and select ‘Disc Setup’ Select ‘Initialize’ Initializing a DVD-RW discEditing Editing ChapterDisc Navigator screen Playlist / Original indicator EditingDisc Navigator menu options Editing Editing VR mode Original and Video mode content PlayErase Title Name Ttl NameUsing the remote key shortcuts to input a name Chapter Edit Chpt EditI 4 î ï ì í ¡ L 5 £Inserting chapter markers into a title Erase Section Erase SecSelect ‘Erase Sec’ from the Disc Navigator menu options Use TitleYou can’t undo a Lock command Lock / UnlockErase All UndoCreating and editing a VR mode Play List You can give titles new names of up to 64 characters longPress Enter after selecting each character Input a name on Create Original title to put into the Play ListDivide MoveCombine Press Enter to add the titleThis command erases all the titles from the Play List Select ‘Undo’ from the Disc Navigator Play List menu optionsUsing the Disc History Disc HistoryDisc History Chapter PhotoViewer PhotoViewer ChapterPlaying a slideshow Reloading files from a discPhotoViewer Zooming the screenRotating the screen Disc Setup menu Disc Setup menu ChapterBasic settings Input Disc Name Disc Setup menu Initialize settings Finalize settings FinalizeVideo/Audio Adjust menu Video/Audio Adjust menu ChapterSetting the picture quality for TV and external inputs Choosing a presetVideo/Audio Adjust menu Setting the picture quality for disc playbackSelect the picture quality setting you want to adjust Audio DRC Initial Setup menu Initial Setup menu ChapterUsing the Initial Setup menu Clock SettingInitial Setup menu Input Line SystemOn Screen Display Front Panel DisplayTuner settings Power Save Setup NavigatorRemote Control Set Auto Channel Setting Auto ScanManual CH Setting Channel SwappingVideo In / Out settings Code CH SettingInput Colour System Component Video Out Ntsc on PAL TVPAL Secam PALInitial Setup menu Audio In settings Audio Out settingsDolby Digital Out 96kHz PCM OutDTS Out Mpeg OutInitial Setup menu Language settings OSD LanguageAudio Language Subtitle LanguageRecording settings DVD Menu LanguageSubtitle Display Selecting ‘Other’ languagesPlayback settings Parental Lock Set Password Still PictureSeamless Playback Parental LockParental Lock Change Password Parental Lock Change LevelParental Lock Country Code Angle Indicator Press Enter to set the new Country codeResetting the recorder Setting up the remote to control yourUsing the TV remote control buttons Additional informationAdditional information Screen sizes and disc formats Additional information Troubleshooting GeneralAdditional information Frequently asked questions What kind of discs can I use for recording?Additional information Language code list Country code listLanguage Language code letter, Language code Country, Country code, Country code letterThis content is copy protected Audio will conform to the Bilingual Recording settingOperation stopped due to power failure Repairing discCleaning the pickup lens Handling discsDamaged discs Storing discsHints on installation Additional information CondensationManual recording modes Moving the recorderAdditional information Glossary PCM Pulse Code Modulation PBC PlayBack Control Video CD/Super VCD onlyProgressive scan video PureCinemaAdditional information Specifications TimerTuner Input/OutputSupplied accessories Pioneer Corporation VRB1336-A