Pioneer PDV-LC20, PDV-20 Resuming play, To pause playback, press, To stop playback, press

6To pause playback, press 8.

•On a DVD, DVD-RW or Video CD, the picture should be paused.

•To restart playback, press 3or 8.

7To skip back/forward a chapter or track, press 4á1 or

燢.

•On the remote, use the 4and ¢ buttons.

8To scan backwards/forwards, press and hold 4á1 or

燢.

•On the remote, use the 1and Á buttons.

•Release the button to resume normal playback.

•If you scan for more than about 5 seconds, scanning continues even after you release the button. In this case, press 3to resume normal playback.

9To stop playback, press 7.

•If you start the disc playing again (3), playback starts from the point last stopped (see Resuming play below).

•To switch the player off, press and hold OFF (7) for about two seconds.

02 Getting Started

When you stop playback, the player	English
Resuming play
remembers where on the disc you got to. As
long as you leave the disc in the player,
even if you switch the player off, the next
time you press 3, playback resumes from
that point.
To start playback from the beginning of the
disc again, press 7while the disc is
stopped.

•For resume to work with CDs and DVD- RW discs, do not switch the player off using the front panel OFF (7) button. If you have a CD loaded and want to

switch off, use the button on the remote to put the player into standby.

•Resume may not work reliably with some discs.

•When a DVD disc is loaded, pressing 4or ¢resumes playback from the start of the title that was playing when the disc was stopped last time.

•See also Bookmarking place on a disc on page 35.

15

En