Memorizing Settings for Often Viewed DVDs (Condition Memory)
You can store settings for DVDs you often watch in memory. Settings remain in memory even if you remove the disc from the player, or switch power to the player OFF. If you load a disc that has its settings memorized, the Condition indicator lights. When you start playing the disc, the memorized settings are automatically recalled.
The Condition indicator in the display section lights. You can memorize details for the following five settings.
Cinema mode/Animation mode (page 44)
Notes
◆If there is a power outage or the power cord is disconnected while power to the player is ON, memorized settings are erased. When disconnecting the power cord, be sure to press POWER button on the main unit and the remote control until “OFF” is no longer indicated in the display.
◆This operates only when using the NORMAL MODE.
CONDITION
Press during Play.
MELODY MODE CONDITION PROGRAM
GUIDE | VOCAL | KEY CONTROL |
VOCAL | PARTNER | |
|
| LASER DBC |
“C O N D I T I O N ” i s indicated in the display.
Tips
¦Settings are stored in memory for use any time.
¦You can store settings for up to 30 DVDs in memory. If you memorize settings for more than 30 DVDs, previously memorized settings are erased in order from the least recently memorized settings.
¦To make changes to ASPECT , Cinema mode/Animation mode,
¦This player memorizes
When a memorized disc is loaded
“CONDITION” is indicated, and previous settings are displayed.
Erasing memorized settings
Load a memorized disc, and while “CONDITION” is indicated,
CLEAR
press .
The recorded details for that disc are erased.
Memorizing Settings for Often Viewed
48 | DVDs (Condition Memory) |