Pioneer DVJ-X1, DVD PLAYER operating instructions Names and Functions of Parts, Operation panel

Before Operating (Names and Functions of Parts)

Names and Functions of Parts

Operation panel

Buttons and controls with the Buttons and controls with the

mark are disabled when the mode select switch is set to NORMAL. mark are disabled when the mode select switch is set to DJ.

	1	2	3	4 5		6	7	8	9	10
		40 41 42	43 44 45		46		47
										48
										49
										50
										51
										52
										53
	39									54
										11
	38									12
										13
	37									14
	36									15
										16
	35									17
	34									18
	33									19
	32
	31
	30
	29
	28	26	25		24 23 22 21 20
	27
1.	POWER OFF (—)/ON (_) switch

7.STOP button

Stops disc playback. When the eject/stop mode select switch is set to LOCK, playback will not stop unless the PAUSE mode is set first.

8.Eject/stop mode select switch (UNLOCK/LOCK)

UNLOCK: If the EJECT (0) button is pressed during playback, the disc stops and is ejected. If the STOP button is pressed during playback, the disc playback stops.

LOCK: If the EJECT (0) button is pressed dur- ing playback, the disc will not be ejected. To eject the disc, set the unit to pause, then press the EJECT (0) button. Likewise, playback will not stop if the STOP button is pressed during playback; to stop disc playback, set the unit to pause, then press the STOP button.

9.EJECT (0) button

When this button is pressed, disc rotation stops and the disc is ejected from the loading slot. If the eject/stop mode select switch is set to the LOCK position, the disc will not be ejected un- less the unit is set to pause before pressing the EJECT (0) button (☞ P.35).

10.Mode select switch

(MODE NORMAL/DJ) ☞ P.15 Located on the rear panel.

11.TOUCH/BRAKE response dial

Adjusts the disc deceleration speed (time to playback stop) when the jog dial’s top surface is touched with jog mode set to VINYL ON. Ro- tate the dial counterclockwise to stop playback quickly, and rotate dial clockwise to cause slower deceleration.

12.RELEASE/START response dial

Adjusts the disc acceleration speed (playback startup time) when the jog dial’s top surface is released with jog mode set to VINYL ON. Ro- tate the dial counterclockwise to restart play- back quickly, and rotate dial clockwise to cause slower acceleration.

13.HYPERJOG MODE button/indicator

When hyper jog mode is set to ON with jog mode set to VINYL ON, turning the jog dial causes the rate of change of image and sound to increase to 2x the rate of changed normally produced (when the hyper jog mode is OFF).

Located on the rear panel.

2.LOOP IN/REALTIME CUE button/indicator

Real time cue ☞ P.40 Loop-in point input ☞ P.43

3.LOOP OUT/OUT ADJUST button/indicator

Loop-out point input ☞ P.43 Loop-out point adjust ☞ P.43

4.	RELOOP/EXIT button ☞ P.43
5.	EMERGENCY LOOP button ☞ P.43

• 4-Beat Loop

When this button is pressed, the current point is set as the loop-in point, and a loop-out point is automatically set 4 beats later; loop play is then initiated between the two points.

• 1-Track Loop

When this button is held depressed for 1 second or more, the chap- ter loop or track loop function is enabled.

6. CUE/LOOP CALL button ☞ P.47

Press to turn cue point navigation mode ON/OFF.

14.JOG MODE select button

Each time pressed, sets VINYL mode alternately ON/OFF.

VINYL mode ON: If surface of jog dial is touched during playback, playback stops, and if the dial is then rotated, image and sound are output in response to the amount of rotation. (if the angled surface of the jog dial is rotated without touching the top, pitch bend opera- tion is enabled.)

¶ The current jog mode is memorized even when power is turned

off.

VINYL mode OFF: The above operations are disabled even when the jog dial’s surface is touched.

15.VINYL mode indicator

Lights when the jog mode is set to VINYL mode.

16.TEMPO control range select button

Each time this button is pressed, the TEMPO control slider’s vari- able range changes (±6%, ±10%, ±16%, WIDE).

When WIDE is selected, the variable range during DVD and MP3 playback is set to +70 to –100%, and during CD playback, +/–100%.

12