To return all settings to their factory defaults

Preparations (Setup)

To return all settings to their factory defaults

Use this command to return all changed settings to their factory default values.

1.Turn power OFF.

2.While holding the STOP button depressed, turn power ON, and continue holding the STOP button until the “POWER ON” indication goes off.

¶All setting contents will be returned to their factory default values.

The DJ mode functions listed below are set to the follow- ing factory defaults in addition to the items in the Setup

Menu (P.23).
Auto Cue:	OFF
Auto Cue level: –60 dB
Jog mode:	VINYL ON
Time mode:	REMAIN

■This command additionally erases all memory contents, in- cluding “video memory” (☞ P.28-29). Be sure you wish to de- lete all memory contents before using this command.

Using the Setup Menu

★Setup menu functions are disabled during DVD playback

in DJ mode, and during CD playback. Set the unit to Stop, or remove the disc before attempting setup operations.

The Setup Menu is used when you wish to modify the default factory settings. The following instructions introduce the basic operations and controls used with the Setup Menu.

¶If you have not yet performed the basic setup using the Setup Navigator, the Setup Navigator screen will appear first.

Confirm that power is turned ON, then

1.Press the SETUP button.

The Setup Menu will appear.

[Example]

Audio1 A2 Video1 V2 Language General

Audio DRC — Off

Dolby Digital Out — Dolby Digital

DTS Out — Off

96kHz PCM Out — 96kHz 3 48kHz

MPEG Out — MPEG 3 PCM
Setup audio
Digital output format/tone adjust
Move	SETUP Exit

Usable operation buttons

2.Press the left and right sides of the cursor button (2/3) to move between the tags at the top of the menu ([Audio1], [Audio2], [Video1], [Video2], [Language], or [General]).

3.Use the upper and lower sides of the cursor button (5/∞) to select the desired setting item.

4.Press the cursor button’s right side (3) to move to the options list.

5.Use the upper and lower sides of the cursor button (5/∞) to move between options.

6.Press the ENTER button to confirm the selection.

Repeat steps 2 – 6 to modify other settings.

7.Press the SETUP button.

The Setup Menu will close.

¶If the Setup Menu is opened again after you have previously made settings there, the previously shown menu screen will appear.

■Disc-dependent settings

Some setting changes are not supported, depending on the kind of disc (DVD/CD) used. Whether a desired setting is supported can be confirmed by viewing the indicator color at the left of the selected setting item. Consult the accompanying table for infor- mation regarding what settings are supported for each disc type. Changed settings become effective immediately.