Pioneer DVD PLAYER, DVJ-X1 Loop playback, Reverse play, About fader start play

Page 43

EMERGENCY LOOP

MODE

NORMAL/DJ

 

RELOOP/

 

EXIT

 

LOOP OUT/

 

OUT ADJUST

 

LOOP IN/

 

REALTIME

 

CUE

 

DIRECTION

 

FWD/REV

 

REV 1,

 

FWD ¡

 

PLAY/PAUSE

 

6

 

Jog dial

Loop playback

★This function is not supported when the rear panel mode select switch (MODE NORMAL/DJ) is set to the NORMAL position.

■To create a loop

1.Press the PLAY/PAUSE (3/8) button to begin playback.

2.During playback, press the LOOP IN/REALTIME CUE but- ton.

This step is unnecessary if you wish to use a previously recorded cue point as the loop-in point.

During the time required for writing the loop-in point, the LOOP IN/REALTIME CUE button will flash for about 2 seconds.

3.During playback, press the LOOP OUT/OUT ADJUST but- ton at the point you wish to use as the loop-out point.

Repeat play (loop play) will begin without break between the se- lected loop-in and loop-out points.

The frame search function can be used to set more accurate out points.

If an alternate viewing angle or audio channel is selected before setting a loop-out point, it may not possible to designate a loop- out point.

Loop-out points cannot be set during reverse play.

In the case of MP3, looping is possible only within the same track where the cue point was set.

■To cancel loop play

During loop playback, press the RELOOP/EXIT button.

The loop will be canceled and playback will continue normally past the loop-out point.

■To change a loop-out point

1.During loop playback, press the LOOP OUT/OUT ADJUST button.

The display will show the loop-out point time, and the LOOP OUT/ OUT ADJUST button will flash rapidly, while the LOOP IN/ REALTIME CUE button indicator turns off.

2.Press the manual search buttons (REV1, FWD¡) or rotate the jog dial.

The loop-out point will change in one-frame units.

The loop-out point cannot be moved to a location before the loop- in point.

To cancel the adjust mode and return to loop play, press the LOOP OUT/OUT ADJUST button or wait 30 seconds.

The loop-out point cannot be adjusted during reverse play.

In the case of MP3, the loop-out point can be adjusted only within the same track where the cue point was set.

Advanced Operations

■To return to a loop (reloop)

After cancellation of a loop, press the RELOOP/EXIT button during normal playback.

Playback will return to the loop-in point of the previously set loop, and loop play will resume.

In the case of MP3, reloop can be performed only within the same folder.

■Automatic loop-out setting

4-beat loop (emergency loop)

During playback, press the EMERGENCY LOOP button.

The normal loop playback indicators will appear (flashing LOOP OUT/OUT ADJUST button and LOOP IN/REALTIME CUE but- ton), and the EMERGENCY LOOP indicator will flash.

The point at which the button is pressed will become the loop-in point, and a loop-out point will be set automatically as described below; loop playback will then continue between the two points.

·If the immediately preceding BPM value is known, a point four beats afterwards will become the loop-out point.

·If the immediately preceding BPM value is not known, the loop- out point will be set four seconds after the loop-in point.

·If either of the above two conditions come after the track end, the track end will be made the loop-out point.

When the EXIT/RELOOP button is pressed, the loop play will end and normal playback will resume.

Emergency loop is not supported during reverse play.

1-track loop (chapter/track repeat)

During playback, hold the EMERGENCY LOOP button de- pressed for 1 second or more.

When the EMERGENCY LOOP button is held depressed for 1 second or more during playback, 1-track loop is enabled, thus repeating playback of the currently playing chapter or track.

The indicator “CHP LOOP” (during DVD playback) or “TRK LOOP” (during CD or MP3 playback) will appear in the display, and the unit will search to the beginning of the currently playing chapter or track, and set the loop-in point there.

The normal loop playback indicators (LOOP OUT/OUT ADJUST and LOOP IN/REALTIME CUE buttons) will flash, and the chapter end or track end will be automatically set at the loop-out points and playback will resume.

If the EXIT/RELOOP button is pressed, the loop play will be canceled and normal playback will resume.

Chapter/track repeat cannot be designated during reverse playback.

When recording to a memory card, record after playing the track to the end.

Reverse play

★This function is not supported when the rear panel mode select switch (MODE NORMAL/DJ) is set to the NORMAL position.

Set the DIRECTION FWD/REV select switch to the REV posi- tion (forward).

The REV indicator lights and playback occurs in reverse.

The jog dial’s operation to accelerate/decelerate playback is reversed.

During reverse playback, loop points cannot be set nor loop-out points modified.

When track search or loop play are performed, the jog dial’s audio/ video memory status display will flash for 1-2 seconds and scratch/ reverse operations may not respond.

About fader start play

★This function is not supported when the rear panel mode select

switch (MODE NORMAL/DJ) is set to the NORMAL position.

When the supplied accessory control cord is used to connect the CON- TROL connector of this player to the CONTROL connector of a DJ mixer DJM-300, DJM-500, DJM-600, DJM-3000, DJM-909, or DJM-707, rais- ing the DJ mixer’s channel fader lever simultaneously releases the player from cue standby, automatically starting instant playback. Fader start can also be started by using the cross fader operation; when the fader lever is returned to its original position, the player also returns to its cue point (back cue) and enters cue standby. (For connection instructions consult page 17).

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents DVJ-X1 Risk of Electric Shock Do not Open Information to UserImportant Safety Instructions Before Operating Confirming AccessoriesContents JOG Dial FeaturesLimited or disabled functions when in DJ mode About DVD playback in DJ modeHandling Precautions Types of discs playable on this unit Discs Usable with This UnitPlaying MP3 files Marks displayed on DVDDVD operating limitations Regarding copyrightCompact Discs CD Disc compositionHandling discs Digital Versatile Discs DVDOperation panel Names and Functions of PartsTempo Reset button Tempo control range indicator ±6, ±10, ±16, WideMaster Tempo button/indicator P.41 Tempo Reset indicator7 8 29 28 27 26 25 24 23 DisplayRear panel Jog dial displayUtes / seconds Playing images from the DVJ-X1 on a television setMain monitor image Preview monitor image Guide display area Total time in chapter minConnection example DJM-600 Accessory control cordConnections Control cord connection for relay playConnection to stereo amplifier without DJ mixer Setting the mode select switch Mode NORMAL/DJ rear panelWhen set to DJ DJ mode When set to Normal Normal modeConnection to television monitor component video Connection to television monitor composite video/S-VideoConnection to video mixer Connecting the power cordVideo mixer Select On-Screen-Display OSD Language SetupHow to perform setup Using the Setup NavigatorSelect type of television connected Exit Setup NavigatorSelect whether connected amplifier supports 96kHz audio Setup Menu items Press the Setup button To return all settings to their factory defaultsUsing the Setup Menu Disc-dependent settingsAdjusting Dolby Digital audio Advanced settingsDigital output setting Mpeg output Audio2 settingsDigital output ON/OFF Expert Mode Surround settingAspect ratio formats With conventional television set Video1 settingsHi-Bit function Expert Mode Set the screen aspect ratio for the televisionTo select a preset picture quality Video quality adjustSelect S-Video output Expert Mode Screen Saver setting Expert modeSelect Video Memory Select and press the Enter button Adjusting picture qualityRepeat steps 3-4 for all desired setting items Press the Enter buttonLanguage settings Video2 settingsSet DVD menu language Expert Mode Automatic language and subtitle settingSelect the Subtitle Language Set language for forced subtitles Expert Mode Set Subtitle Display ON/OFF Expert ModeLanguage Code List Change the Parental Lock level Setting Parental LockRecording a password To change your passwordTo change the country code Country Code ListForced eject function Set the rear panel Power switch to onPrecautions when playing 8cm CD singles Loading and Removing DiscsExample Main Menu When a CD is loadedWhen a DVD is loaded Beginning playbackAuto cue function To temporarily interrupt playback pause modeTo stop playback Super-fast search To turn off the angle indicatorChanging the viewing angle DVD only Fast forward/fast reverseTitle search DVD only Track search skipFolder search MP3 only Changing playback speed Setting cue pointsMixing different tracks splicing Setting master tempoHyper jog mode Jog dial functionsHot cue Advanced OperationsScratch play Spin playReverse play Loop playbackAbout fader start play Press the Enter button Relay play with two playersSelecting tracks with MP3 navigator MP3 only Press the Menu buttonUse the TEXT/WAVE select button to select Wave display Wave displayRegarding Text display To view guide displaysRecording to memory cards Operations Using Memory CardsTo recall a recorded cue or loop point Player display ContentsTo recall data recorded on memory cards Message displays during recording of cue and loop pointsTo recall a memorized hot cue point To read a cue/loop point into a hot cueTo delete all memory card data To delete information recorded on memory cardsTo delete individual cue/loop points To delete all cue/loop point information for an Entire discTroubleshooting ¶ 96kHz PCM Out option is set to 96kHz 3 48kHz Error code Error type Error content Cause and remedy Error message displayDot Matrix Guide Display Messages Specifications Allstate Parkway Markham, on L3R OP2 905 877 800 782Pioneer Electronics of Canada, Inc CA 90801-1760, U.S.ATSZZF/05G00000
Related manuals
Manual 103 pages 1.83 Kb
Top Page Image Contents