Pioneer DVJ-X1, DVD PLAYER Advanced Operations, Scratch play, Spin play, Hot cue

Page 42

Advanced Operations

Advanced Operations

Buttons and controls with the

mark are disabled when

the mode select switch is set to NORMAL.

 

MODE

 

NORMAL/DJ

HOT CUE

TOUCH/

A

BRAKE

B

RELEASE/

C

START

REC MODE

JOG MODE

 

PLAY/PAUSE

 

6

 

Jog dial

Scratch play

★This function is not supported when the rear panel mode select switch (MODE NORMAL/DJ) is set to the NORMAL position.

When the jog mode is set to VINYL mode ON, pressing the jog dial’s top panel while rotating the dial will cause audio and video to be output in proportion to the direction and speed of jog dial rotation.

1.Press the JOG MODE select button so that the VINYL mode indicator lights.

2.During playback, press the top of the jog dial.

Playback will slow and come to a stop (the time required to com- plete stop can be set independently).

If the jog dial is rotated as playback slows but before it has com- pletely stopped, sound will be interrupted suddenly, and will then start again, but in the direction corresponding to the direction the jog dial is rotated in step 3.

3.Rotate the jog dial in the desired direction of playback.

Playback will occur in proportion to the direction and speed of jog dial rotation.

4.Release hand from surface of jog dial.

Playback will return to its original status (the time required until full acceleration can be set independently).

■To set the deceleration time (time until playback fully stops

when jog dial surface is pressed) Rotate the TOUCH/BRAKE response dial.

The time till playback stops changes.

■To set the acceleration time (time until playback fully re- gains original speed when hand is released from jog dial surface)

Rotate the RELEASE/START response dial.

The time till playback returns to normal speed changes.

Spin play

★This function is not supported when the rear panel mode select

switch (MODE NORMAL/DJ) is set to the NORMAL position.

With VINYL mode ON, press the surface of the jog dial, or press the PLAY/PAUSE (6) button to set the unit to pause, then rotate the jog dial quickly; even if you remove your hand from the jog dial, playback will occur in proportion to the direction and speed of the jog dial rotation.

Hot cue

★This function is not supported when the rear panel mode select switch (MODE NORMAL/DJ) is set to the NORMAL position.

This function allows playback to be started quickly from one of three points (A, B, C), by previous setting of cue point and loop information.

Storing to memory may not be possible while the jog dial’s audio/ video memory status display is flashing.

■Setting hot cue point

1.Press the HOT CUE REC MODE button so that the HOT CUE A, B, and C button indicators light red.

2.During playback, pause mode or cue standby mode, find the point you wish to use as the hot cue, and at that point press the button (A, B, or C) in which you wish to store the cue information.

The button memory will recorded with the time position data and playback method.

The pressed button will flash red for about 2 seconds, then light steadily.

During DVD playback, a thumbnail of the hot cue point will be displayed on the preview monitor screen.

If the HOT CUE button is pressed during the loop setting mode (while LOOP OUT/OUT ADJUST button and LOOP IN/REALTIME CUE buttons are flashing), the currently playing loop information will be stored in memory.

If a memory card is loaded, the data recorded to the HOT CUE button will be stored on the memory card; in this way, the previ- ously set information can be called up quickly when playing the same disc at a later date (☞ P.46).

■Starting a hot cue

1.Press the HOT CUE REC MODE button so that the HOT CUE A, B, and C button indicators light green or orange.

Buttons containing stored hot cue points will light green.

Buttons containing stored loop information will light orange.

Buttons without any stored information will not light.

2.During playback, pause, or cue standby mode, press one of the buttons with stored information (A, B, or C).

During playback, pause mode or cue standby mode, if a green or orange lighted button is pressed, playback will begin instantly based on the information recorded in the button. In this case, cue point information stored in the normal CUE button, or loop information stored in the RELOOP/EXIT button will not be overwritten, but remain valid.

Pressing a HOT CUE button with stored loop information causes loop playback to begin instantly based on the stored information. In this case, the RELOOP/EXIT button can be used to cancel the loop playback just as with normal loop play, and the LOOP OUT/ OUT ADJUST button can likewise be used to modify the loop-out point. If loop information is modified, the loop information stored in the button will simultaneously be modified.

If a memory card is loaded, inserting a disc will allow previously recorded hot cue and loop information for that disc to be restored (☞ P.47).

*When playing a DVD that prohibits title or other searches, it may be impossible to begin playback from the hot cue point.

In this case, the prohibited mark will appear in the display and the

similar mark

will appear on the preview monitor screen.

*In the case of MP3, hot cue is supported only within one and the same folder.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents DVJ-X1 Information to User Risk of Electric Shock Do not OpenImportant Safety Instructions Confirming Accessories Before OperatingContents Features JOG DialAbout DVD playback in DJ mode Limited or disabled functions when in DJ modeHandling Precautions Discs Usable with This Unit Types of discs playable on this unitRegarding copyright Marks displayed on DVDDVD operating limitations Playing MP3 filesDigital Versatile Discs DVD Disc compositionHandling discs Compact Discs CDNames and Functions of Parts Operation panelTempo Reset indicator Tempo control range indicator ±6, ±10, ±16, WideMaster Tempo button/indicator P.41 Tempo Reset buttonDisplay 7 8 29 28 27 26 25 24 23Jog dial display Rear panelTotal time in chapter min Playing images from the DVJ-X1 on a television setMain monitor image Preview monitor image Guide display area Utes / secondsControl cord connection for relay play Accessory control cordConnections Connection example DJM-600When set to Normal Normal mode Setting the mode select switch Mode NORMAL/DJ rear panelWhen set to DJ DJ mode Connection to stereo amplifier without DJ mixerConnection to television monitor composite video/S-Video Connection to television monitor component videoConnecting the power cord Connection to video mixerVideo mixer Using the Setup Navigator SetupHow to perform setup Select On-Screen-Display OSD LanguageExit Setup Navigator Select type of television connectedSelect whether connected amplifier supports 96kHz audio Setup Menu items Disc-dependent settings To return all settings to their factory defaultsUsing the Setup Menu Press the Setup buttonAdvanced settings Adjusting Dolby Digital audioDigital output setting Surround setting Audio2 settingsDigital output ON/OFF Expert Mode Mpeg outputSet the screen aspect ratio for the television Video1 settingsHi-Bit function Expert Mode Aspect ratio formats With conventional television setScreen Saver setting Expert mode Video quality adjustSelect S-Video output Expert Mode To select a preset picture qualityPress the Enter button Adjusting picture qualityRepeat steps 3-4 for all desired setting items Select Video Memory Select and press the Enter buttonVideo2 settings Language settingsAutomatic language and subtitle setting Set DVD menu language Expert ModeSelect the Subtitle Language Set Subtitle Display ON/OFF Expert Mode Set language for forced subtitles Expert ModeLanguage Code List To change your password Setting Parental LockRecording a password Change the Parental Lock levelCountry Code List To change the country codeLoading and Removing Discs Set the rear panel Power switch to onPrecautions when playing 8cm CD singles Forced eject functionBeginning playback When a CD is loadedWhen a DVD is loaded Example Main MenuTo temporarily interrupt playback pause mode Auto cue functionTo stop playback Fast forward/fast reverse To turn off the angle indicatorChanging the viewing angle DVD only Super-fast search Track search skip Title search DVD only Folder search MP3 only Setting cue points Changing playback speedJog dial functions Setting master tempoHyper jog mode Mixing different tracks splicingSpin play Advanced OperationsScratch play Hot cueLoop playback Reverse playAbout fader start play Press the Menu button Relay play with two playersSelecting tracks with MP3 navigator MP3 only Press the Enter buttonTo view guide displays Wave displayRegarding Text display Use the TEXT/WAVE select button to select Wave displayOperations Using Memory Cards Recording to memory cardsMessage displays during recording of cue and loop points Player display ContentsTo recall data recorded on memory cards To recall a recorded cue or loop pointTo read a cue/loop point into a hot cue To recall a memorized hot cue pointTo delete all cue/loop point information for an Entire disc To delete information recorded on memory cardsTo delete individual cue/loop points To delete all memory card dataTroubleshooting ¶ 96kHz PCM Out option is set to 96kHz 3 48kHz Error message display Error code Error type Error content Cause and remedyDot Matrix Guide Display Messages Specifications CA 90801-1760, U.S.A 800 782Pioneer Electronics of Canada, Inc Allstate Parkway Markham, on L3R OP2 905 877TSZZF/05G00000
Related manuals
Manual 103 pages 1.83 Kb
Top Page Image Contents