Pioneer DVD-V630 Digital Audio Connections, Digital OUT Coaxial, Digital OUT Optical

Audio Connections

This player features two digital (optical and coaxial) and also analog 2 channel and 5.1 channel audio output connection possibilities.

Digital Audio Connections:

You can enjoy the digital audio recorded on DVD discs from both optical digital and coaxial digital output jacks.

When making digital audio connections, do not make connections from both the coaxial and optical digital outputs to the same component.

DIGITAL OUT (Coaxial)

The digital signal is transmitted electronically through a coaxial cable.

•Use to connect to an AV amplifier or receiver with built-in Dolby Digital, DTS, or MPEG decoder.

•Use a coaxial cable (not supplied) to connect the coaxial digital output on the player to the coaxial digital input on an AV amplifier or receiver.

AV amplifier or receiver with built-in Dolby Digital, DTS, or MPEG decoder

When a DVD recorded in Dolby Digital, DTS, or MPEG is loaded, noise will be output if you have made connections via the digital audio jacks to a receiver or amplifier that cannot decode a Dolby Digital, DTS, or MPEG digital bitstream. In this case, be sure to set the [Digital Jack] setting in the Setup Navigator to best reflect the type of system you are using (page 25). Additionally, the digital audio settings can be adjusted manually in the Setup screen Audio 1 menu (page 33).

DIGITAL OUT

OPT.

Note

DIGITAL IN

DIGITAL OUT (Optical)

The digital signal is transmitted as light pulses through a optical cable.

•Use to connect to an AV amplifier or receiver with built-in Dolby Digital, DTS, or MPEG decoder.

•Use a optical cable (not supplied) to connect the digital optical output on the player to the digital optical input on an AV amplifier or receiver.

AV amplifier or receiver with built-in Dolby Digital, DTS, or MPEG decoder

There is no digital output when using Karaoke mode.

DIGITAL OUT	DIGITAL IN
OPT.

Note

There is no digital output when using Karaoke mode.

18