Pioneer DV-LX50 operating instructions Coaxial/Optical

Page 43

Problem

Remedy

 

 

No audio, or audio is distorted. • No audio is output during slow motion playback or when scanning discs other than Audio CDs and SACDs.

•Some DVD discs do not output digital audio: Switch your amplifier to the player’s analog outputs.

•Check that the disc is free from dust and dirt, and that it is not damaged (page 40).

•Check that all interconnects are firmly inserted.

•Check that the plugs and terminals are free of dirt, oxide, etc. and clean if necessary. Also check the cable for damage.

•Make sure the player’s output is not connected to the amplifier’s phono (turntable) inputs.

•Check your amplifier/receiver’s settings (volume, input function, speaker settings, etc.).

08

English

The analog audio is OK, but there appears to be no digital audio signal.

•Make sure that the Digital Out (page 32) is set to On.

•Check that the Dolby Digital Out, DTS Out and MPEG Out (page 32) are suitable for your amplifier/ receiver — check the instruction manual that came with your amplifier/receiver.

•SACDs and some DVD-Audio discs do not output digital audio. Listen through the player’s analog audio outputs.

•Check that the PURE AUDIO indicator is not lit. If it is, press the PURE AUDIO button (See also Front panel on page 16).

Noticeable difference in DVD and CD

• This is due to differences in the audio format and is not a malfunction.

volume.

 

 

 

 

Cannot play multi-channel audio.

• Make sure that Audio Output Mode (page 36) is set to 5.1 Channel.

 

• Check that the Dolby Digital Out, DTS Out and MPEG Out (page 32) are suitable for your amplifier/

 

receiver—check the instruction manual that came with your amplifier/receiver.

 

• DVD-Audio and SACDs do not output multichannel digital audio. Listen through the player’s analog

 

outputs.

 

 

• Check that the settings in the Speaker Installation screen are correct (page 34).

 

• Check the audio options available from the disc menu.

 

 

Cannot listen to high-sampling rate

• Make sure that Linear PCM Out (page 32) is set to Down Sample Off.

audio through the digital output.

• As a copy-protection measure, some DVDs do not output 96 kHz audio. In this case, even if set to

 

Down Sample Off, the player automatically outputs the audio at 48 kHz. This is not a malfunction.

 

 

Cannot output 192 kHz or 176.4 kHz

• The player does not output digital audio at these sampling rates. The digital output is automatically

digital audio.

downsampled.

 

 

 

Cannot output 96 kHz or 88.2 kHz

• Check that Linear PCM Out (page 32) is set to Down Sample Off.

digital audio.

• Some discs are digital copy protected and do not output high sampling rate digital audio. In this case

 

the output is automatically downsampled.

 

 

DTS audio signals are not output

• If this unit is connected to a non-DTS compatible amplifier or decoder using a digital audio cable, set

from the DIGITAL AUDIO OUT

DTS Out (page 32) to DTS > PCM. If you do not do this, noise will be output when you play a DTS disc.

(COAXIAL/OPTICAL).

• If this unit is connected to a DTS-compatible amplifier or decoder using a digital audio cable, check the

 

amplifier settings, and that the cable is properly connected.

 

 

Audio mix does not sound right or

• Make sure that Audio Output Mode (page 36) is set to 2 Channel if you’ve connected to the stereo

sounds incomplete (for example,

inputs on your amplifier or TV.

 

inaudible dialog).

 

 

 

 

The audio recorded on a Super VCD

• If the audio is switched to “2” when playing a Super VCD that contains only one stereo soundtrack,

disc is not output properly.

there may be no sound at all. Press

AUDIO to change the soundtrack.

 

 

Can’t hear effect of Virtual

• Virtual Surround does not work with SACD or DVD-Audio.

Surround.

• The Virtual Surround effect is only output through the AUDIO OUT (2ch) analog audio outputs.

 

• Make sure that Audio Output Mode (page 36) is set to 5.1 Channel.

 

• The effectiveness of Virtual Surround varies with the disc.

 

 

The power automatically turns on.

• This unit’s power may be turned on when you control this unit from a connected TV. If you do not want

 

this unit to be turned on in this way, set this unit’s HDMI Control (page 34) to Off.

 

 

The power automatically turns off.

• This unit’s power may be turned off when you control this unit from a connected TV. If you do not want

 

this unit to be turned off in this way, set this unit’s HDMI Control (page 34) to Off.

 

 

Your TV and AV system

• The connected TV and AV system automatically may change inputs in response to this unit starting

automatically change inputs.

playback or having the GUI screen (ex. Disc Navigator) displayed. If you do not want your TV and AV

 

system to change inputs in this way, set this unit HDMI Control (page 34) to Off.

 

 

 

43

En

Page 42 Page 44
Image 43
Page 42 Page 44
Contents DVD Player Lettore DVD Operating Environment Ventilation Caution Contents Before you start FeaturesChapter Don’t Hints on installationWhat’s in the box Putting the batteries in the remoteDisc/content format playback compatibility DivX video compatibility About MPEG-4 AACWMA Windows Media Audio compatibility About DivX videoRear panel ConnectionsEasy connections To power outletTo audio inputs To video inputs Use a component video cable not supplied to connect Connecting using a Scart AV cableConnecting using the S-Video output Connecting using the component video OutputConnecting the multichannel analog outputs Connecting to an AV receiverTip Controlling this player via another Pioneer component Connecting the digital outputAbout Hdmi Connecting using HdmiAbout Hdmi Control MP3/WMA/MPEG-4 AAC Changing the output resolutionPure Audio Sacd SetupControls and displays Front panelTitle PartPrgsve GRPUsing the remote control Remote controlFL Dimmer Input Select Setting up the remote to control your TVUsing the TV remote control buttons Volume +Proceed to step Press Enter to start setting up using the Startup NavigatorUse the / buttons to choose a language, then press EnterReturn Setting up the player for your TVUsing the on-screen displays Setting the language of this player’s on- screen displays Stop Playing discsBasic playback controls  PlayNumbers Resume and Last MemoryDVD-Video and DivX disc menus Video CD/Super VCD PBC menusWhy won’t the disc I loaded play? FAQFrame advance/frame reverse Playing discsScanning discs Playing in slow motionSelect the thumbnail image for what you want to play Tip Select a view optionLooping a section of a disc Using repeat playRepeat to build up a program list Using random playCreating a program list Select a random play optionZooming the screen Switching subtitlesSwitching audio language/channels Searching a discDuring playback, press Angle to switch angle Switching camera anglesDisplaying disc information Audio Settings menu Audio Settings and Video Adjust menusVideo Adjust menu Digital Audio Out settings Using the Initial Settings menuLanguage settings Video Output settingsRGB Stereo Display settingsOptions settings Speakers settingsDTS Downmix Parental LockDisplaying your DivX VOD registration code About DivX VOD contentAudio Output Mode Playing DivX VOD contentDVD About the audio output settingsMPEG-4 AAC DTS CD Hdmi About the Hdmi audio output settingsHdmi output with DVD-Audio and Sacd sources MPEG1Use the / cursor up/down to select a speaker Speaker InstallationDefault settings L/R Large C Large SL/SR LargeSW On Speaker Distance Screen sizes and disc formats Taking care of your player and discsDVD-Video regions Setting the TV systemResetting the player Selecting languages using the language code listTroubleshooting COAXIAL/OPTICAL Hdmi troubleshooting Aspect ratio GlossaryCountry/Area, Country/Area code, Country/Area code letter Language code listCountry/Area code list Language Language code letter, Language codeSpecifications    ++$##!.     Italiano Indice Capitolo Informazioni preliminariCaratteristiche Importante Consigli per l’installazioneContenuto della confezione Inserimento delle batterie nel telecomandoCompatibilità con dischi DVD-R/-RW Informazioni sulla riproduzione DualDiscCompatibilità con dischi CD-R/-RW Compatibilità con dischi DVD+R/+RWCompatibilità con video DivX Informazioni su MPEG-4 AACCompatibilità con WMA Windows Media Audio Informazioni su video DivXPannello posteriore CollegamentiNota Collegamenti faciliAgli ingressi audio Agli ingressi video Alluscita di alimentazioneCollegamento tramite l’uscita S-Video Collegamento tramite cavo AV ScartCollegamento tramite l’uscita video Component Consiglio Collegamento a un ricevitore AVCollegamento delle uscite analogiche multicanale SubwooferCollegamento di un’uscita digitale Informazioni su Hdmi Collegamento tramite HdmiInformazioni su Hdmi Control Modifica della risoluzione in uscita Vano del disco Indicatore HdmiPannello anteriore  STANDBY/ON paginaDisplay dei caratteri Si illumina quando sullo schermo viene visualizzato un menu14 2 D Utilizzo del telecomando TelecomandoUtilizzo dei tasti del telecomando Impostare il telecomando per controllare il televisoreProcedere al passo PredisposizioneUtilizzo dei display su schermo Impostazione del lettore in base al televisoreNumeri Riproduzione di dischiComandi basici per la riproduzione Premere  Play per avviare la riproduzioneVisualizza il menu PBC Ripristino e ultima memoriaMenu dei DVD-Video e dei dischi DivX Menu Video CD/Super VCD PBCPerché il disco inserito non viene riprodotto? Domande più frequenti FAQPer avanzare/indietreggiare di un fotogramma Riproduzione di dischiScansione dei dischi Riproduzione in slow motionSelezionare la miniatura che si desidera riprodurre Selezionare un’opzione di visualizzazioneUtilizzo della riproduzione ripetuta Riproduzione ripetuta di una sezione di un discoSelezionare un’opzione di riproduzione ripetuta Durante la riproduzione casuale, usare i seguenti comandi Utilizzo della riproduzione casualeCreazione di un elenco di programmi Selezionare un’opzione di riproduzione casualeIngrandimento dello schermo Ricerca su discoCambio dei sottotitoli Cambio della lingua/del canale audioVisualizzazione delle informazioni del disco Per cambiare l’angolazione della telecameraPremere Home Menu e selezionare ‘Audio Settings’ dal Menu Audio Settings e Video AdjustMenu Audio Settings Menu Video AdjustImpostazioni Digital Audio Out Utilizzo del menu Initial SettingsImpostazioni Language Impostazioni Video OutputImpostazioni Options Impostazioni DisplayImpostazioni Speakers Impostazione/modifica di Parental Lock Registrazione di una nuova passwordModifica della password Impostazione/modifica del codice Paese/areaSelezionare ‘Display’ Informazioni sul contenuto DivX VODVisualizzazione del codice di registrazione DivX VOD Riproduzione di contenuto DivX VODMPEG-4 AAC CD DTS Informazioni sulle impostazioni di uscita audioUscita Hdmi con fonti DVD-Audio e Sacd Informazioni sulle impostazioni di uscita audio HdmiImpostazioni predefinite tutti i diffusori 3.0m Speaker Distance Speaker InstallationManutenzione del lettore e dei dischi Dimensioni dello schermo e formati dei dischiAgli utenti di televisori standard Impostazione del sistema televisivoRipristino delle impostazioni predefinite del lettore Aree dei DVD-VideoRisoluzione dei problemi Riprodotto Audio assente o distortoMa quello digitale è assente Dei DVD e CDRisoluzione dei problemi con Hdmi Audio analogico GlossarioPaese/area, codice Paese/area, lettera codice Paese/area Elenco dei codici delle lingueElenco codici Paese/area Lingua lettera codice, Codice della linguaSpecifiche tecniche Pioneer Corporation
Top Page Image Contents