Connecting the digital output
This player has both optical and
Depending on the capabilities of your AV receiver, you might have to set up this player to output only digital audio in a compatible format. See Digital Audio Out settings on page 32 and refer to the operating instructions that came with your AV receiver.
Note that SACD audio is not output through these jacks, so this connection should be in addition to, rather than instead of, a 5.1 channel analog connection.
•Connect one of the DIGITAL AUDIO OUT (COAXIAL/ OPTICAL) jacks on this player to a digital input on your AV receiver.
To coaxial/optical digital input
AV receiver
Controlling this player via another Pioneer component
The CONTROL IN jack allows you to control this player via the remote control sensor of another Pioneer component — typically an AV receiver — that has a CONTROL OUT jack. Remote control signals are passed through to the player from the remote sensor of the other component, allowing you greater freedom in the placement of your player.
•Use a miniplug cord (not supplied) to connect the CONTROL IN jack of this player with the CONTROL OUT jack of your other Pioneer component.
To CONTROL OUT
AV Receiver
02
English
For an optical connection, use an optical cable (not supplied) to connect the DIGITAL AUDIO OUT OPTICAL jack to an optical input on your AV receiver.
For a coaxial connection, use a coaxial cable (similar to the supplied video cable) to connect the DIGITAL AUDIO OUT COAXIAL jack to a coaxial input on your AV receiver.
•You will also need to connect a coaxial digital cable, analog audio cable, or video cable.
•When connected via System Control, point the remote control toward the connected component (such as an AV receiver). The remote will not work correctly when pointed at this unit.
•You cannot connect use System Control with components that do not have a System Control jack or with components manufactured by companies other than Pioneer.
13
En