Pioneer DV-989AVi-G operating instructions Channel Level

Page 53

Audio Settings menu

1Press HOME MENU and select ‘Audio Settings’ from the on-screen display.

2Highlight Virtual Surround, then use the Joystick (left/right) to change to ‘2V/

SRS TruSurround’ or ‘Off’, as required.

 

Audio Settings

1/ 2

 

 

 

 

 

 

 

Audio DRC

Off

 

 

 

Legato PRO

 

 

 

 

Off

 

 

 

Hi-Bit

 

 

 

 

On

 

 

 

Virtual Surround

Off

 

 

 

Channel Level

Fix

 

 

 

 

 

 

 

3Press ENTER to make the setting and exit the Audio Settings screen.

•You can also use the SURROUND button on the remote control to switch Virtual Surround on (2V/SRS TruSurround)/ Off.

•Virtual Surround does not work with CD, MP3, DVD-Audio or SACD discs, or 96kHz Linear PCM soundtracks.

•The Virtual Surround effect is output only through the analog AUDIO OUT (2ch) jacks.

•Make sure that Audio Output Mode is set to 2 Channel (see Audio Output Mode on page 71).

•How good the surround effect is varies with the disc.

06

Channel Level

• Default setting: Fix

This setting allows you to set the level of each channel sent to the 5.1 channel analog outputs.

1Press HOME MENU and select ‘Audio Settings’ from the on-screen display.

2Highlight Channel Level, then use the Joystick (left/right) to change to ‘Fix’ or ‘Variable’, as required.

 

Audio Settings

1/ 2

 

 

 

 

 

 

 

Audio DRC

Off

 

 

 

Legato PRO

Off

 

 

 

Hi-Bit

 

 

 

 

On

 

 

 

Virtual Surround

 

 

 

 

Off

 

 

 

Channel Level

Fix

 

 

 

 

 

 

 

 

 

 

 

 

•Fix – Channel levels are fixed, but you can set the speaker distances

•Variable – You can specify variable channel levels as well as speaker distances

3If you chose Variable, use the joystick (down) to proceed to the next screen.

 

Audio Settings

1/ 3

 

 

 

 

 

 

 

Audio DRC

Off

 

 

 

Legato PRO

 

 

 

 

Off

 

 

 

Hi-Bit

On

 

 

 

Virtual Surround

 

 

 

 

Off

 

 

 

Channel Level

Variable

 

 

 

 

 

 

 

4Variable setting only: Set the channel levels for each speaker.

 

Audio Settings

2/ 3

 

 

 

 

 

 

 

Channel Level L

0.0 dB

 

 

 

Channel Level C

0.0 dB

 

 

 

Channel Level R

 

 

 

 

0.0 dB

 

 

 

Channel Level RS

0.0 dB

 

 

 

Channel Level LS

 

 

 

 

0.0 dB

 

 

 

Channel Level SW

0.0 dB

 

 

 

 

 

 

 

53

En

Page 52 Page 54
Image 53
Page 52 Page 54
Contents
DV-989AVi-G Class Laser Product Operating Environment POWER-CORD CautionContents Video Settings menu Audio Settings menuInitial Settings menu Video AdjustBefore you start Chapter FeaturesBefore you start Before you start Before you start What’s in the box Putting the batteries in the remote controlUsing the remote control CD-R/RW compatibility General disc compatibilitySuper Audio CD Photo CD, DVD-RAM, DVD-ROM, CDPC Created Disc Compatibility DVD-R/RW CompatibilityCompressed Audio Compatibility CDs, SACDs and Video CD/Super VCDs are divided into tracks Before you start Titles, chapters, groups and tracksDVD-Video regions Rear panel Connecting upConnecting up Chapter Easy connections Connecting upComponent Video OUT 11 D1/D2 Video OUT Except Australian modelConnecting using an S-Video output Using other types of video outputConnecting using the D1/D2 video output Connecting for multichannel surround soundConnecting using the component video output Connecting using a digital audio output Connecting using the multichannel analog outputsDigital Optical Connector AV receiver Connecting using i.LINKTo connect components for two-way commu- nication About i.LINKCreating an i.LINK network Hdmi Connecting using HdmiAbout Hdmi Control Front panel Controls and displaysControls and displays Chapter OPEN/CLOSE Controls and displaysAbout progressive scan video Prgsve PartGRP TitleControls and displays Remote control Angle JOG JOG ModeSubtitle TOP MenuSwitching on Setting the TV SystemGetting Started Getting Started ChapterLet’s Get Started Getting StartedPress Enter again to finish setting up Using the on-screen displaysHome Display/exit the on-screen dis Menu playSelect ‘Setup Navigator’ Getting Started Setting up with the Setup NavigatorOn-screen display OSD appears Select a DVD languageDid you connect this player to an AV receiver? Congratulations, setup is complete Basic playback controls Getting Started Playing discsPress OPEN/CLOSE to open the disc tray Load a disc Press play to start playbackFront panel controls DVD disc menusDisplays the PBC menu Video CD/Super VCD PBC menusDisc may have been illegally copied Why won’t the disc I loaded play?Why does the volume level seem lower during Sacd playback? Introduction Playing discsPlaying discs Chapter To resume normal playback, press play Scanning discsPlaying in slow motion Playing discs Using the Multi DialDuring playback, press Pause Press and hold Until Press repeatedly to change the slow motion speedLooping a section of a disc Playing discs Frame advance/frame reverseUsing random play Playing discs Using repeat playSelect a random play option Creating a program listRandom Title Random Chapter Random Off Random Group Random Track Random OffSelect ‘Create/Edit’ from the list of program options To play the program list, press play Editing a program listRepeat to build up a program List Select a program play function Searching a discOther functions available from the program menu Switching the DVD audio language Switching subtitlesPress Enter to start playback Press Subtitle repeatedly to select a subtitle optionSwitching DVD-Audio audio channels Switching DVD-RW audio channelsSwitching camera angles Displaying disc information Sacd displays DVD-RW displays CD and Video CD Displays During PBC playback onlyAudio Settings menu Chapter Audio Settings menuDefault setting Off Audio DRCThere are four settings, plus Off Audio Settings menuHi-Bit Virtual SurroundChannel Level Speaker Distance Video Settings menu Chapter Video Settings menuVideo Adjust Creating your own presetsAdjust the picture quality settings Video Settings menuVideo Settings menu Initial Settings menu Chapter Initial Settings menuUsing the Initial Settings Digital Audio Out settings Menu Default setting OnDolby Digital Out Initial Settings menuDTS Out Linear PCM OutMpeg Out Video Output settingsTV Screen Component OutVideo Out Language settingsStill Picture Audio LanguageAuto Language Subtitle LanguageDisplay settings Options Registering a new passwordBackground Screen SaverSetting/changing the Parental Lock level Changing your passwordSelect ‘Password Change’ Use number buttons to enter your password, then press EnterYou may also want to refer to the Country/Area code list on Setting/changing the Country/Area codeBonus Group Select a new levelDefault setting Single DVD Playback ModeDefault setting DVD-Audio Auto Disc MenuSacd Playback Hdmi SettingsDefault setting 2ch Area Colour ResolutionAspect Ratio CD Playback Default setting PCM PlaybackVideo Memory AudioSpeaker Installation Audio Output ModeSpeakers DTS DownmixL and R speakers are paired you can’t set them differently Default setting all speakers 3 mSpeaker Distance Channel Level Speaker Distance settings do not affect Sacd playbackMove the cursor left to go back to Speaker Distance screenAudio Out Link SetupConnections Setup DVD-Audio Out Default setting 5.1 ChannelAuto Select Play Taking care of your player and discs Additional informationAdditional information Chapter Additional information Screen sizes and disc formats Resetting the playerWidescreen TV users Standard TV usersDTS CD Additional information About the audio output settingsDTS Additional information About the Hdmi output settingsDTS CD DTS*2Channel compatible*1 Hdmi output with DVD-Audio sourcesHdmi Ver .1 DVD-Audio Hdmi Ver .1 Incompatible withMpeg Additional information About the i.LINK output settingsCountry/Area code list Additional information Language code listLanguage Language code letter, Language code Country/Area, Country/Area code, Country/Area code letterGlossary File extension Dynamic rangeMpeg audio LinkProgressive scan video Pqls Precision Quartz Lock System rate controlSampling frequency Slideshow DVD, Video CD/Super VCDDisc won’t play or is automatically ejected after loading Additional information TroubleshootingGeneral DVD/CD/Video CD/Super VCD player SACDs and some DVD-Audio discs do not output digital audio Amplifier/receiverListen through the player’s analog audio outputs This is due to differences in the audio format and is not aRight or sounds incomplete Check that Linear PCM Out is set to Down Sample OffDialog Effectiveness of TruSurround varies with the discBandwidth Digital Content Protection Hdcp Hdmi troubleshootingIsn’t damaged Be made with components compatible with both DVI and HighOn page 68 to change the Hdmi resolution Make sure the resolution on this player matches thatComponent you have connected using HDMI. See Hdmi Settings Output Mode is set to 5.1 Channel see Audio Output Mode on Link troubleshootingLink Check LINK-related messagesAdditional information Specifications Pioneer Corporation
Top Page Image Contents