Pioneer DV-989AVi-G Screen sizes and disc formats, Resetting the player, Widescreen TV users

09Additional information

or give you an electric shock. Check the power cable once in a while. If you find it damaged, ask your nearest Pioneer authorized service center or your dealer for a replacement.

Screen sizes and disc formats

DVD-Video discs come in several different screen aspect ratios, ranging from TV programs, which are generally 4:3, to Cinema- Scope widescreen movies, with an aspect ratio of up to about 7:3.

Televisions, too, come in different aspect ratios; ‘standard’ 4:3 and widescreen 16:9.

Widescreen TV users

If you have a widescreen TV, the TV Screen setting (page 60) of this player should be set to 16:9 (Wide).

When you watch discs recorded in 4:3 format, you can use the TV controls to select how the picture is presented. Your TV may offer various zoom and stretch options; see the instructions that came with your TV for details.

Please note that some movie aspect ratios are wider than 16:9, so even though you have a widescreen TV, these discs will still play in a ‘letter box’ style with black bars at the top and bottom of the screen.

Standard TV users

If you have a standard TV, the TV Screen setting (page 60) of this player should be set to 4:3 (Letter Box) or 4:3 (Pan&Scan), depending on which you prefer.

78

Set to 4:3 (Letter Box), widescreen discs are shown with black bars top and bottom.

Set to 4:3 (Pan&Scan), widescreen discs are shown with the left and right sides cropped. Although the picture looks larger, you don’t actually see the whole picture.

Please note that many widescreen discs over- ride the player’s settings so that the disc is shown in letter box format regardless of the setting.

•Using the 16:9 (Wide) setting with a stan- dard 4:3 TV, or either of the 4:3 settings with a widescreen TV, will result in a distorted picture.

Resetting the player

Use this procedure to reset all the player’s settings to the factory default.

1Switch the player into standby.

2Using the front panel buttons, hold

down the (stop) button and press POWER to switch the player back on.

All the player’s settings are now reset, and you should see the ‘Let’s Get Started’ screen.

En