Pioneer DV-989AVi-G operating instructions DVD/CD/Video CD/Super VCD player

09Additional information

DVD/CD/Video CD/Super VCD player

Problem	Remedy
The remote control doesn't	• The CONTROL IN jack on the rear panel is connected: Point the
seem to work.	remote control at the connected component to control this player.
	• The remote control is too far from the player, or the angle with the
	remote sensor is too wide: Use the remote within its operating range
	(see Using the remote control on page 8).
	• The batteries are exhausted: Put in new ones (see Putting the
	batteries in the remote control on page 8).
No picture/No color.	• Check that the PURE AUDIO indicator is not lit. If it is, press the
	PURE AUDIO button (See also Front panel on page 23).
	• Incorrect video connections: Check that connections are correct
	and that plugs are inserted fully. Also check the video cable for
	damage.
	• TV/monitor or AV amplifier settings are incorrect: Check the
	instruction manual of the connected equipment.
	• The video output is set to progressive but your TV/monitor is not
	compatible with progressive scan: Press the PROGRESSIVE button on
	the front panel to set to interlace (the indicator above the button
	should not be lit) (see About progressive scan video on page 24).
Screen is stretched or	• The TV Screen setting in the Initial Settings menu is incorrect. See
aspect does not change.	TV Screen on page 60 for how to set it correctly for your TV/monitor.
	• If your TV/monitor is connected using an S-video cable, try changing
	the S-Video Out setting (see S-Video Out on page 61).
Picture disturbance during	• This player is compatible with Macro-Vision System copy guard.
playback or dark.	Some discs include a copy prevention signal, and when this type of
	disc is played back, stripes etc., may appear on some sections of the
	picture depending on the TV. This is not a malfunction.
	• Due to the player’s copy protection circuits, connection of this
	device through a VCR or an AV selector may prevent recording or
	cause picture problems. This is not a malfunction.
	• The TV system may be set inappropriately. See Setting the TV System
	on page 28.

88

En