Pioneer DV-989AVi-G operating instructions Speaker Distance

•Use the Joystick (up/down) to select a speaker.

•Use the Joystick (left/right) to adjust the channel level for that speaker.

Channel levels can be set from –6 dB to +6 dB. in 0.5 dB increments.

5Press ENTER to make the settings and exit the audio settings screen.

•You can’t adjust the channel level for any speakers that are set to Off in the Speaker Installation menu screen (see Speaker Installation on page 71).

•The Fix setting is equivalent to setting all the channel levels to +6 dB. Therefore, the Variable setting will usually sound quieter than the Fix setting.

Speaker Distance

• Default setting: all speakers 3 m

To get the best surround sound from your system, you should set up the speaker distances from your listening position.

1Press HOME MENU and select ‘Audio Settings’ from the on-screen display.

2Move the cursor down until you reach the Speaker Distance setting screen.

•Use the joystick (up/down) to select a speaker.

•Use the joystick (left/right) to adjust the distance from your listening position to that speaker.

Front left/right (L/R) speaker distances can be set from 30 cm to 9 m in 10 cm increments.

The center speaker (C) and subwoofer (SW) can be set from –2 m to +2 m relative to the front left/right speakers.

Surround left/right (LS/RS) speakers can be set from –6 m to +2 m relative to the front left/ right speakers.

When you adjust the front left (L) or front right (R) speaker, all the other speaker distances are adjusted relative to that speaker.

3Press ENTER to make the settings and exit the audio settings screen.

•The speaker distance settings have no effect on SACD playback. The channel level settings, however, do apply.