Pioneer DV-989AVi-G operating instructions Speaker Distance, Default setting all speakers 3 m

Use the Speaker Installation screen to tell the player what kinds of speakers you have connected.

1Use the Joystick to move the cursor up/down to select a speaker.

•The L and R, and RS and LS speakers are paired; you can’t set them differently.

2Move the cursor right to modify the selected speaker.

3Use the Joystick (up/down) to change the current setting.

•You can see the effect of your changes in the room graphic on the right of the screen.

•Except for the subwoofer, you can set speaker size to Large or Small. If the main speaker cone in the speaker is 12cm or more, set to Large, otherwise set to Small (or Off if you don’t have that speaker).

•If you set the front L and R speakers to Small, the center and surround speakers are automatically set to Small and the subwoofer to On.

•The subwoofer can only be set to On or Off.

4Move the cursor left to go back to the speaker list if you want to modify another speaker, or press ENTER to exit the Speaker Installation screen.

72

Speaker Distance

• Default setting: all speakers 3 m

You only need to make this setting if you connected this player to your amplifier using the 5.1 channel analog outputs.

These settings do not affect any digital audio output.

To get the best surround sound from your system, you should set up the speaker distances from your listening position.

1Use the Joystick to move the cursor up/down to select a speaker.

•The L and R speakers are paired; you can’t set them differently.

2Move the cursor right to change the speaker distance for the highlighted speaker.

3Use the Joystick (up/down) to change the distance.

•When you change the distance settings of the front left (L) or front right (R) speakers, all the other speaker distances change relative to it.

•Front left/right (L/R) speaker distances can be set from 30 cm to 9 m in 10 cm increments.