Pioneer DV-989AVi-G operating instructions Make sure the resolution on this player matches that

09Additional information

Problem	Remedy
No HDMI video output	• Make sure that you’ve selected this player as the HDMI input in the
	settings for the component you’re using. You may need to refer to the
	instruction manual of the component to do this.
	• It is not possible to output SACD sources from the HDMI
	connection.
	• Check that the HDMI cable is connected properly and that the cable
	isn’t damaged.
	• Check that components connected using the HDMI interface are
	switched on and HDMI compatible. (An HDMI connection can only
	be made with components compatible with both DVI and High
	Bandwidth Digital Content Protection (HDCP).)
	• This unit has been designed to be compliant with HDMI (High
	Definition Multimedia Interface) Version 1.1. Depending on the
	component you have connected, unreliable signal transfers may
	result.
	• Check that the PURE AUDIO indicator is not lit. If it is, press the
	PURE AUDIO button (See also Front panel on page 23).
	• Make sure the resolution on this player matches that of the
	component you have connected using HDMI. See HDMI Settings
	on page 68 to change the HDMI resolution.
No multichannel HDMI	• Make sure the Audio setting in the HDMI menu is set to Auto (see
audio.	HDMI Settings on page 68 to do this).
A connected HDMI	• This unit has been designed to be compliant with HDMI (High
component doesn’t work	Definition Multimedia Interface) Version 1.1. Depending on the
with this player.	component you have connected, using a DVI connection may
	result in unreliable signal transfers.

Color problems occur with your monitor after changing the Video Adjust (page 55), Video Memory (page 70).

•You can correct this by choosing an input setting on your monitor according to the setting you’ve selected (see the table in the note following Video Memory on page 70).

92

En