Pioneer DV-S88A Setting compatibility with 96 kHz output, Confirming the settings, Upthe, Player

Setting digital audio connections to an AV amplifier or decoder

The [Digital Jack] screen establishes whether digital connections have been made to an AV amplifier, receiver, or external decoder. As there are numerous options available, please refer to the instructions supplied with the component the player is connected to determine what digital audio formats can be decoded. If you have made no digital connections, select [Not

Connected].

Audio1 Audio2 Video LanguageGeneral

Setup Navigator		Dolby Digital
Amp Connection		Dolby Digital/DTS
		Dolby Digital/MPEG
Digital Jack		Dolby D/DTS/MPEG
		PCM
		Not Connected
Compatible with Dolby Digital
Move	ENTER	Select	SETUP	Exit

Settings: Dolby Digital*

Dolby Digital/DTS

Dolby Digital/MPEG

Dolby D/DTS/MPEG

PCM

Not Connected

* Factory setting

Setting compatibility with 96 kHz output

The [96 kHz PCM Audio] screen establishes whether or not the AV component the player is connected to is capable of processing an audio signal with a sampling rate of 96 kHz. This screen only appears if connections have been made to an external AV component as determined in previous screens.

Audio1 Audio2 Video LanguageGeneral

Setup Navigator
Amp Connection
	No
96 kHz PCM Audio	Yes
	Don't Know

Digital jack not compatible with 96kHz

Move ENTER Select SETUP Exit

Settings: No*

Select if the connected AV component cannot process an audio signal with a sampling rate of 96 kHz.

Yes

Select if the connected AV component can process an audio signal with a sampling rate of 96 kHz.

Don’t Know

Select if you are uncertain whether the connected AV component can process an audio signal with a sampling rate of 96 kHz.

* Factory setting

Confirming the settings

The [Exit Setup Navigator] is the final screen in the Setup Navigator.

Audio1 Audio2 Video LanguageGeneral

Setup Navigator
		Save Changes
Exit Setup Navigator		Delete Changes
		Start Again
Changes are saved
Move
	ENTER	Select	SETUP	Exit

Settings: Save Changes*
Select to have the player make all of the
necessary audio, video and language settings
according to your responses in the Setup
Navigator.
Delete Changes
Select to exit the Setup Navigator without
changing any of the system settings.
Start Again
	SETTING
settings again.
Select to return to the [OSD Language]
screen of the Setup Navigator and do the	UPTHE
* Factory setting
To exit the Setup screen	PLAYER
When you have completed setting up the player using

the Setup Navigator or if you exit the Setup Navigator, the Setup screen General menu appears. Press SETUP to close the Setup screen.

To change other player settings in the Setup screen menus

The procedure for changing the settings in the Setup screen menus is described on page 28.

23

En