To make a program of your favorite parts of a
disc as it plays – DVD/Video CD/CD
With this player, it is possible to make a program as you watch a DVD or Video CD or while listening to a CD.
Press and hold PROGRAM for at least 2 seconds at any point during playback of a title, group, chapter, or track you want to program, and it will be made into or added to a program without displaying a Program screen. When a title, group, chapter, or track is successfully added to the program, it is shown momentarily in the display as well as its position in the program.
Chapter 07 3 Program 03
To confirm the contents of a program:
Press PROGRAM.
Notes
•When using this function to program DVDs, the program being created corresponds to the Program screen (chapter/ track or title/group) that appears when PROGRAM is pressed. Be sure to check that the appropriate program type is selected.
•You cannot make a program containing chapters/tracks in different titles/groups.
To save a program in memory – DVD-Video
This player can memorize the programs on up to 24 DVDs. By turning the [Program Memory] to [On], the player will save your program and recall it the next time you use the same DVD. When the program memory exceeds 24, programs will be erased in chronological order from the oldest program in memory.
1 Move the cursor control joystick down to highlight [Program Memory] and then right to select [On].
Program Chapter Program Title
Current: | Title | 7 Chapter 1 | |
Title |
| 1 | (Chapter 1 ~ 49) |
09 | 07 | 18 |
|
Program Memory | On | ||
|
|
| Off |
| Move | PROGRAM Exit | |
2 Press ENTER.
The program is saved in memory.
Notes
•When a DVD with a program stored in memory is loaded, program playback may start automatically.
58 • You can’t use Program Memory with
En
To erase a program saved in memory – DVD-Video
The player erases programs in chronological order when the maximum number of programs that can be held in memory is exceeded. To prevent the player from erasing older programs that you may still use regularly, or when you don’t want to use a program anymore, it is possible to manually erase programs stored in memory.
1 Load a DVD that has a program stored in memory.
2 Press PROGRAM.
The program screen appears.
3 Move the cursor control joystick down to highlight [Program Memory] and then right and down to select [Off].