525 line Digital Progressive Scan Compatible Video Output
–DVD
Connecting to a progressive scan- compatible TV
Compared to a standard interlaced TV picture, a progressive scan TV is capable of stable,
Set only if you connected the COMPONENT VIDEO OUT jacks to a progressive
When a
When the switch is set to MENU SELECT, make changes to the [Component Video] setting in the Setup screen Video menu.
Audio1 Audio2 Video Language General
TV Screen – 16:9(Wide)
Component Video Interlace
Still Picture – Auto
On Screen Display –
Angle Indicator – On
Frame Search – Off
Move | SETUP | Exit |
Settings: Interlace*
Use this setting with regular TVs that are not compatible with progressive scan. Check the TV’s instruction manual if you are not sure about this.
Progressive
Use this setting with TVs and monitors that have progressive scan component video inputs. Check the TV’s instruction manual if you are not sure about this.
* Factory setting
Tip:
If this player is set to output
If your TV can not be switched between 4:3 and 16:9, set this player to [Interlace].
Note
If you connect a TV that is not compatible with a progressive scan signal and choose one of the progressive scan settings, you will not be able to see any picture at all.
Set the rear panel COMPONENT VIDEO OUT switch to the 525i(480i) position.
Compatibility of this unit with progressive-scan TVs.
‘CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE “STANDARD DEFINITION” OUTPUT. IF THERE ARE QUESTIONS REGRADING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.‘
ADJUSTING AUDIO
AND VIDEO
SETTINGS
37
En