Pioneer DVD-204 instruction manual New with Version 2.03 On-Screen Programming

Page 1

Instruction Manual

Models DVD-204 and DVD-212

Control Units for Pioneer DVD Players

New with Version 2.03 On-Screen Programming

See Addendum at back of this manual

Museum

Technology

Source, Inc.

323 Andover Street

Wilmington Massachusetts 01887 phone 800.729.6873

978.657.3898 fax 978.657.7132

info@museumtech.com

www.museumtech.com

Issued Febrary 2002 Revised May 2003

Image 1

Contents New with Version 2.03 On-Screen Programming Introduction Pioneer DVD Setup Settings for Pioneer 7400 DVD PlayerPreparing for Programming Settings for Pioneer 7200 DVD PlayerReviewing the DVD Disc Programming the DVD-204 /DVD-212 Configuring the computer used for programmingProgramming the Buttons Selecting Chapter, Frame, or Chapter Start/Frame EndMain Menu Main Menu againProgramming the Idle or Attract Loop Options Menu Testing the Lamps and ButtonsList of Options Button 1 Lamp InversionSlave Delay Multiple Player Installations Button 4 or Button 12 ResetPC-9 Programming Cable Rear Panel Connections, DVD-204 and DVD-212 ON-SCREEN Programming Button 3 Plays Frames 3000 to Change this? Yes Button 3 plays Frames 5678 to Change this? Yes Museum Technology Source, Inc LDV-2 Splitter Cable Master PlayerMuseum Technology Control Units with a Windows Based PC Trouble Shooting Addendum Setup Instructions Pioneer DVD-V5000 Player Using the same technique, make the following settings