Pioneer DV-410V-K operating instructions Connecting using Hdmi, Connecting the digital output

02Connecting the digital output

This player has coaxial-type digital audio output for connection to an AV receiver.

Depending on the capabilities of your AV receiver, you might have to set up this player to output only digital audio in a compatible format. See Digital Audio Out settings on page 36 and refer to the operating instructions that came with your AV receiver.

•Connect one of the COAXIAL DIGITAL AUDIO OUT jacks on this player to a digital input on your AV receiver.

To coaxial digital input

AV receiver

		VIDEO OUT	DIGITAL	AUDIO OUT
	PB		AUDIO OUT	L
			COAXIAL
	PR	Y		R
HDMI OUT	COMPONENT VIDEO OUT		S-VIDEO OUT

DV-410V

For a coaxial connection, use a coaxial cable (similar to the supplied video cable) to connect the COAXIAL DIGITAL AUDIO OUT jack to a coaxial input on your AV receiver.

Connecting using HDMI

(DV-410V only)

If you have a HDMI equipped monitor or display, you can connect it to this player using a commercially available HDMI cable.

The HDMI connector outputs uncompressed digital video, as well as almost every kind of digital audio that the player is compatible with, including DVD-Video, Video CD, CD, WMA, MP3, MPEG-4 AAC, DivX video and WMV.

•Use an HDMI cable (not supplied) to connect the HDMI OUT interconnect on this player to an HDMI interconnect on a HDMI-compatible display.

To HDMI interconnect

HDMI-compatible display

		VIDEO OUT	DIGITAL	AUDIO OUT
	PB		AUDIO OUT	L
			COAXIAL
	PR	Y		R
HDMI OUT	COMPONENT VIDEO OUT		S-VIDEO OUT

DV-410V

The arrow on the cable connector body should be face up for correct alignment with the connector on the player.

Note

•This unit has been designed to be compliant with HDMI (High-Definition Multimedia Interface). Depending on the component you have connected, using a DVI connection may result in unreliable signal transfers.

•When you change the component connected to the HDMI output, you will also need to change the HDMI settings to match the new component (see HDMI Out on page 36, HDMI Resolution on page 37 and HDMI Color on page 37 to do this). However, the settings for each component are then stored in memory (for up to 2 components).

14

En