Setting the image quality / Setting the audio
This section describes image quality settings.
Preparation:
¥Turn ON the TV and set it to the video input mode.
¥Select ÒAV SETUP 2Ó in ÒAV SETUPÓ. For the procedure, see steps 1 to 3 in ÒUsing the SETUP MENUÓ on page 24.
SETUP MENU
TIMER REC SET |
|
| AV SETUP 2 |
| |
SYSTEM SETUP |
| BRIGHTNESS | STD | ||
AV SETUP |
| E.B.L. |
| OFF | |
REC SETUP |
|
|
|
| |
CH SETUP |
|
|
|
| |
OTHER |
|
|
|
|
|
| SELECT |
|
|
|
|
ENTER | ENTER | RETURN | BACK | SETUP | END |
BRIGHTNESS
You can control the brightness level of the image. Select ÒBRIGHTNESSÓ and select the level from the below.
MAX: The image becomes brighter.
STD: The image is of standard brightness.
MIN: The image becomes darker.
E.B.L.
To select the black level of playback pictures, set your preference and monitorÕs ability.
ON: Enhanced grey scale (0 IRE cut off)
OFF: Standard grey scale (7.5 IRE cut off)
NOTE:
The E.B.L. function only works when playing back DVD- Video,
This section describes audio settings.
Preparation:
¥Turn ON the TV and set it to the video input mode.
¥Select ÒAUDIOÓ from ÒAV SETUPÓ. For the proce- dure, see steps 1 to 3 in ÒUsing the SETUP MENUÓ on page 24.
SETUP MENU
AV SETUPVIRTUAL SURROUND | AUDIO |
| OFF | Various | ||
TIMER REC SET |
|
|
|
| ||
SYSTEM SETUP |
|
|
| STD |
| |
| DRC |
|
|
| settings | |
REC SETUPEXTERNAL AUDIO INPUT |
| STEREO | ||||
CH SETUPSAP |
|
|
| OFF |
| |
OTHER | DOLBY DIGITAL OUTPUT |
| PCM |
| ||
|
|
|
|
|
| |
| SELECT |
|
|
|
|
|
ENTER | ENTER | RETURN | BACK | SETUP | END |
|
DRC
DRC (Dynamic Range Control) enables you to control the dynamic range so as to achieve a suitable sound for your equipment.
Select ÒDRCÓ and select the level from the below.
MAX: Full dynamic range is maintained.
STD: Full dynamic range is reduced.
TV: Dynamic range is reduced.
NOTES:
¥This function works only during playback of Dolby Digital recorded discs.
¥When you listen to the sound from TVÕs speaker, we recommend that you select ÒTVÓ.
¥The level of Dynamic Range Reduction may differ depending on the DVD.
VIRTUAL SURROUND (Spatializer N- 2-2TM)
Sound that is not recorded in the surround mode will be changed to artificial surround sound and output. Select ÒVIRTUAL SURROUNDÓ and select ÒONÓ to ac- tivate the virtual surround function. Select ÒOFFÓ to can- cel the virtual surround function.
NOTE:
This function does not work with a video tape.
EXTERNAL AUDIO INPUT
The audio mode for the audio input jack can be se- lected, choosing either stereo or monaural.
Select ÒEXTERNAL AUDIO INPUTÓ and select from the below.
STEREO: The sound is treated as stereo sound.
L CH: The sound is treated as the monaural sound of the left channel.
R CH: The sound is treated as the monaural
sound of the right channel.
31
2J40101A | 31 | 3/4/06, 10:43 AM |