Recording
Timer recording
NOTES:
¥Recording starts a few seconds be- fore the preset starting time.
¥You cannot use the timer recording for the both DVD and VCR at the same time.
¥You can playback the DVD during the VCR timer recording, and you can playback the VCR during the DVD timer recording.
¥The timer recording program is stopped during timer recording, the stopped program is not erased from the timer recording list. In this case, please cancel the program, otherwise the stopped program will be activated if the unit returns to timer recording standby mode.
The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and/or criminal liability.
60
SETUP MENU
|
|
|
| TIMER REC SET |
|
| |
| TYPE |
|
|
| ONCE | REC | REC |
|
|
|
| TO | MODE | ||
| DATE (MM/DD) |
|
| 11/20(TH) |
|
| |
|
|
|
|
|
|
|
|
| START |
|
|
| 08:00PM |
|
|
| END |
|
|
| 09:30PM |
|
|
| CH |
|
|
| 12 |
|
|
|
|
|
|
|
|
|
|
| REC TO |
|
|
| DVD |
|
|
| REC MODE |
|
| LP |
|
| |
|
|
|
|
|
|
|
|
|
|
| OK |
|
|
| |
|
| SELECT |
|
|
|
|
|
ENTER | ENTER | RETURN | BACK | SETUP | END | ||
11 Select ÒOKÓ and press ENTER.
The timer program is determined and the TIMER REC SET screen appears again.
12 When you enter the other program for the timer recording, re- peat the steps 3 to 11.
13 Press SETUP.
The TIMER REC SET screen disappears and the display will return to the normal screen.
14 Press TIMER REC. The timer indicator Ò 
Ó will appear on the display and the unit stands by for recording.
Stopping the timer recording
After the timer recording has started, you can cancel the timer record- ing (but continue recording), or stop recording completely if you want. To cancel the timer recording, press and hold TIMER REC for more than 2 seconds. The timer indicator Ò 
Ó disappears from the display and recording continues. Press STOP to stop recording completely.
Checking or changing the timer recording
When you want to check the selected timer recording, follow the steps 1 and 2 of ÒSetting timer recordingÓ and display the TIMER REC SET screen. To change the timer recording, select the program to be changed and press ENTER. The changing method is the same as that for the re- cording a program for the first time.
Cancelling the timer recording
Display the TIMER REC SET screen.
Select the program you want to cancel and press CANCEL, then the selected program will be erased from the timer recording list.
In case Timer programs-overlap
Do not overlap timer programs as portions of the conflicting programs will be lost. The first recording time has priority over the next recording time as shown in the diagram below.
In this case, the next recording time is delayed a maximum of about 1 minute.
If you set up many timer recording programs at the same start time, the priority will be the top program in the timer recording list.
| 8 : 00 | 9 : 00 | 10 : 00 | 11 : 00 |
Program 1 |
|
|
|
|
Program 2 |
|
|
|
|
|
| Deleted Parts |
| |
Program 3 |
|
|
|
|
|
| Non Recorded Portion Parts |
| |
Recording | Prog.1 |
| Prog.2 | Prog.3 |
Control Settings |
|
|
|
|
2J40101A | 60 | 3/4/06, 10:45 AM |