Introduction
Connections with the TV or audio component
Connect to a stereo amplifier with audio output
You can enjoy high quality audio by connecting the audio output to your amplifier.
Connect the audio output jacks to any | ||
Connect to an AV Amplifier with built-in digital surround
If you are using an Amplifier with a
Use this connection to connect an:
•AV amplifier with
•AV amplifier with
NOTE:
You may connect to a TV with a component video cable (not supplied) or
| Audio(L) | Audio/Video cable (supplied) | |
Coaxial digital |
| ||
output |
| ||
audio output | To Audio/Video input | ||
Audio(R) | |||
| Video output | ||
| output | ||
|
| ||
Optical digital |
|
| |
audio output |
|
| |
|
| Coaxial | |
|
| digital cable | |
|
| (not supplied) | |
DVD/VCR | Connect either | ||
|
Optical digital cable (not supplied)
TV
AV Amplifier with
Connecting the optical digital cable
You may connect to an AV Amplifier with an optical digital cable (not supplied) instead of a coaxial digital cable.
When you connect the optical digital cable (not supplied), remove the dust protection cap from the rear panel. When not using the optical digital cable, attach the dust protection cap to protect against dust.
NOTES:
¥When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL or DTS to ON on the AV amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be damaged.
¥Caution for the optical digital audio output connector: Do not connect to an amplifier (with an optical digital input connector) which does not contain a Dolby Digital or DTS decoder. Otherwise, any attempt to play DVDs may cause such a high level of noise that it may be harmful to your ears and damage your speakers.
¥DTS audio will be output only from the COAXIAL or OPTICAL output. To hear DTS audio,
¥When playing
¥Some DTS decoders which do not support
¥The optical or coaxial digital output jack output sounds in the bitstream.
22
2J40101A | 22 | 3/4/06, 10:43 AM |