Dubbing
Dubbing using other equipment |
| |||
|
|
|
| |
You can connect another VCR or camcorder to dubbing. |
| |||
Typical connection: When using this unit as a recording device |
| |||
| Playback Camcorder | |||
!! | To AV jack | |||
|
| |||
|
| Recording VCR | ||
|
|
|
| |
| To Video IN | To Audio (R) IN | ||
|
|
|
| To Audio (L) IN |
|
|
|
| AUDIO/VIDEO cable (not supplied) |
NOTES:
¥If using a monaural VCR or other equipment, connect Audio (L) IN jack to Audio OUT using only one audio cable.
¥When this unit is used as a play- back device, a mark or a charac- ter displayed on the screen is also dubbed as an image. When the screen display is set to OFF, see ÒDISPLAYÓ on page 29.
¥If no special permission is obtained from the copyright owner, videos recorded from TV programs or movies can only be used for your own personal enjoyment.
¥You may not dub a copy protected video or DVD disc.
80
You can also connect to the audio/video input jack (L1) at the rear side of this unit. In addition, each
When a video is recorded using this unit
Preparation:
¥Turn ON the TV and set the unit to the video input mode.
¥Load a video tape where the
¥To record onto a video tape, set the unit to VCR mode, whereas to record onto a disc, set it to DVD mode.
1Press INPUT SELECT and set the channel to L2 (or L1). L1 (LINE 1): on the rear panel
L2 (LINE 2): on the front panel
Confirm that L2 (or L1) appears on the display window.
2Press REC MODE/SPEED and select the recording mode. VCR: SP or SLP (See page 49)
DVD: SP, LP, SLP or XP (See page 53)
3Press REC/OTR on this unit, then press PAUSE/STILL.
4Press the PLAY button on the playback device, then press the PAUSE/STILL button.
5Release the recording pause and the playback still simultaneously to begin the duplicating process.
6To stop dubbing, press STOP.
2J40101A | 80 | 3/4/06, 10:46 AM |